11-19-2014, 08:37 PM #1
- Join Date
- Feb 2014
1.8 Jet Boat Pump Shaft Replacement,OIL SEALS, proper install, Manual is very vague
I went to replace my impeller in the fall and ended up replacing my drive shaft because the threads got chewed up during disassemble.
Hoping someone has better details or actual factory descriptions or pictures.
I have searched online and YouTube and found very little specific information
The (service manual) provided very little information regarding replacing the drive shaft, and also shows a simple picture of the two oil seals.
1. I went off old shaft and measured for pressing in the new shaft.
2. The oil seals had metal faces on both, trying to verify correct install and assembly
Thanks in advance for the help
I am sure this is simple for somebody who frequently works on these parts
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Pwgsx in forum 2-Stroke PerformanceReplies: 6Last Post: 08-17-2015, 04:50 PM
By smoked134134 in forum Open DiscussionReplies: 5Last Post: 03-01-2013, 07:25 PM
By Chrisrokc in forum Yamaha PWC Performance (2-stroke)Replies: 3Last Post: 05-04-2007, 08:59 AM
By 800AMSOIL4U in forum Sea Doo Open DiscussionReplies: 7Last Post: 04-21-2007, 09:10 PM
By 800AMSOIL4U in forum Polaris Open DiscussionReplies: 1Last Post: 04-20-2007, 04:10 PM