Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    porschemaniac's Avatar
    Join Date
    Apr 2009
    Location
    missouri
    Posts
    1,271
    +1
    32

    Parting out Gpr sho Many Many parts!

    Looks like I'm going to part out my Gpr sho project. To many projects going and keeps getting put to the back burner. Partial list of what's available. Pm for pics or further info.
    Fresh from millennium .5 over 1.8 block with new JE 9.5 pistons- new k1 h beam rods - oem crank. Will not split up bottom end. Unassembled and in original boxes
    oem head - disassembled for build
    Basically 2 complete motors worth of oem parts - pistons - rods - valve train - oil pumps -intake and exhaust systems complete- electronics from harnesses - ecu's (3) and gauge cluster

    R&D C24 supercharger with water cooled housing

    aluminum tb damper assembly
    Pm for anything I'm forgetting

    2001 Gpr hull. Show quality. Fully trued hull with moulded in hole shot mod - 3" through hull exhaust - all unused holes filled before paint - tunnel reinforcement and all insert reinforcements installed. Black epoxy lower hull, lambo arancio borialis orange 3 stage pearl urethane upper hull. Carbon fiber solo seat - carbon fiber 2 piece hood. All new rub rails. Cr bend pro taper bars Ect Ect

    150 hp cold fusion nitrous kit complete - new in box

    Way to many parts to list. If you need anything further pm me if you don't see it listed.


  2. #2
    TuningForkMarine's Avatar
    Join Date
    May 2013
    Location
    Palm coast FL / Shakopee MN
    Posts
    1,301
    +1
    163
    pics would help

  3. #3
    porschemaniac's Avatar
    Join Date
    Apr 2009
    Location
    missouri
    Posts
    1,271
    +1
    32
    Quote Originally Posted by TuningForkMarine View Post
    pics would help
    It was a last minute decision to halt this build tonight. I will be posting pics up over the next few days and I can also email pics. Most parts are boxed up and I'll be unpacking to get photos and inventory

  4. #4
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311
    So Is the hull ready to drop the motor in? Or does it still need lots of work?

  5. #5
    gp1200rider's Avatar
    Join Date
    Mar 2008
    Location
    MD
    Posts
    987
    +1
    47
    With moulded in hole shot mod ?

  6. #6
    Quote Originally Posted by gp1200rider View Post
    With moulded in hole shot mod ?
    I believe he's talking about Leos holeshot kit, molded into the bottom of the back rub rail.

  7. +1 by:


  8. #7
    porschemaniac's Avatar
    Join Date
    Apr 2009
    Location
    missouri
    Posts
    1,271
    +1
    32
    Click image for larger version. 

Name:	image.jpg 
Views:	108 
Size:	83.1 KB 
ID:	348234Click image for larger version. 

Name:	image.jpg 
Views:	88 
Size:	66.3 KB 
ID:	348231Click image for larger version. 

Name:	image.jpg 
Views:	86 
Size:	61.5 KB 
ID:	348232Click image for larger version. 

Name:	image.jpg 
Views:	100 
Size:	79.1 KB 
ID:	348230Click image for larger version. 

Name:	image.jpg 
Views:	82 
Size:	85.5 KB 
ID:	348233Click image for larger version. 

Name:	image.jpg 
Views:	108 
Size:	83.1 KB 
ID:	348234Click image for larger version. 

Name:	image.jpg 
Views:	88 
Size:	66.3 KB 
ID:	348231Click image for larger version. 

Name:	image.jpg 
Views:	86 
Size:	61.5 KB 
ID:	348232Click image for larger version. 

Name:	image.jpg 
Views:	100 
Size:	79.1 KB 
ID:	348230Click image for larger version. 

Name:	image.jpg 
Views:	82 
Size:	85.5 KB 
ID:	348233Correct. Hull is finished. Just needs everything installed. Here are some pics
    Quote Originally Posted by scittb View Post
    Quote Originally Posted by gp1200rider View Post
    With moulded in hole shot mod ?
    I believe he's talking about Leos holeshot kit, molded into the bottom of the back rub rail.

  9. #8
    porschemaniac's Avatar
    Join Date
    Apr 2009
    Location
    missouri
    Posts
    1,271
    +1
    32
    Click image for larger version. 

Name:	image.jpg 
Views:	78 
Size:	59.7 KB 
ID:	348235Click image for larger version. 

Name:	image.jpg 
Views:	83 
Size:	55.1 KB 
ID:	348236

  10. #9
    porschemaniac's Avatar
    Join Date
    Apr 2009
    Location
    missouri
    Posts
    1,271
    +1
    32
    Click image for larger version. 

Name:	gpr 014.JPG 
Views:	77 
Size:	426.5 KB 
ID:	348237Click image for larger version. 

Name:	gpr 015.JPG 
Views:	73 
Size:	418.8 KB 
ID:	348238Click image for larger version. 

Name:	gpr 011.JPG 
Views:	82 
Size:	430.3 KB 
ID:	348239Click image for larger version. 

Name:	gpr 012.JPG 
Views:	86 
Size:	428.8 KB 
ID:	348240Click image for larger version. 

Name:	gpr 013.JPG 
Views:	85 
Size:	426.5 KB 
ID:	348241

  11. #10
    porschemaniac's Avatar
    Join Date
    Apr 2009
    Location
    missouri
    Posts
    1,271
    +1
    32
    Click image for larger version. 

Name:	true3.jpg 
Views:	75 
Size:	79.2 KB 
ID:	348242Click image for larger version. 

Name:	exh 002.JPG 
Views:	90 
Size:	432.3 KB 
ID:	348243Click image for larger version. 

Name:	exh 001.JPG 
Views:	88 
Size:	432.3 KB 
ID:	348244

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. GPR-SHO conversion
    By Bruce in forum Conversion PWC Performance Skis
    Replies: 1242
    Last Post: 08-17-2017, 09:54 AM
  2. FS parting out SL 650 many parts will fit the SL 750
    By snoproken in forum Polaris Classifieds
    Replies: 0
    Last Post: 09-21-2011, 09:27 PM
  3. FS parting out Gpr
    By GPRFrank in forum Yamaha Classifieds
    Replies: 3
    Last Post: 05-23-2010, 12:01 PM
  4. GPR/SHO nozzle
    By RX951 in forum Yamaha PWC Performance (4-stroke)
    Replies: 5
    Last Post: 11-21-2008, 10:46 AM
  5. parts are out for sho and fzr
    By bajaeater in forum Yamaha PWC Performance (4-stroke)
    Replies: 17
    Last Post: 08-21-2008, 09:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •