Results 1 to 2 of 2
  1. #1
    rxp steve
    Join Date
    Jul 2010

    Should I replace pump seals

    I have an 07 RXT with 280 hrs and I have the pump off and pressure tested good. Everything's tight, no play that I can feel. The reason I ask is that my RXP had water intrusion last summer and had to rebuild the pump which was no big deal other than the cost. Both ski's have about the same hours. I have everything for a total rebuild (except shaft) that I ordered for both pumps at the same time. I think with so many hours I should replace the seals. But I'm not sure what all I should replace or if I should just leave it alone. Thanks

  2. #2
    Tiny's Avatar
    Join Date
    Sep 2006
    The Atl
    If the grease looks good, then I would leave it alone for now unless you want to have a project...

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 11-19-2014, 08:37 PM
  2. Help replacing water pump seal MSX 150
    By Redrum in forum MSX/Matrix
    Replies: 3
    Last Post: 04-04-2012, 01:24 PM
  3. Pump seal replacement?
    By blkturbo! in forum 4-Tec Performance
    Replies: 3
    Last Post: 03-20-2012, 12:14 PM
  4. Replacing pump bearing and seals.
    By aussie rxp in forum 4-Tec Performance
    Replies: 7
    Last Post: 03-22-2010, 11:34 PM
  5. Need to replace pump shoe insert, what else should I replace?
    By Jetscreamer in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 05-11-2007, 10:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts