12-17-2014, 09:40 PM #1
- Join Date
- Dec 2014
1988 Waverunner jet pump disassembly
Hi. I have removed the jet pump and the drive shaft from the large jet pump housing. I want to replace rubber seals and bearing that is midway up shaft. Which way do these seals and bearing get removed? Fore or aft? I will probably need to pull with a slide hammer and want to be sure I pull the correct direction. thanks
03-22-2015, 11:28 AM #2
- Join Date
- Apr 2014
You will need to press them out or risk damage to the pump.
03-23-2015, 12:54 PM #3
Seems like I remember a set screw up there somewhere then they go forward.
03-24-2015, 04:49 PM #4
Myself is exactly right....there is a set screw you loosen and they come out easily.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Corsair in forum Yamaha How To & FAQsReplies: 0Last Post: 08-22-2013, 04:07 AM
By znesius in forum 4-Tec PerformanceReplies: 8Last Post: 07-13-2012, 08:01 PM
By Maulin Marto in forum 2-Stroke PerformanceReplies: 3Last Post: 02-19-2010, 12:44 PM
By Foggy in forum 4-Tec PerformanceReplies: 15Last Post: 02-12-2010, 11:57 AM
By steven1300r in forum Yamaha Old School SkisReplies: 1Last Post: 02-18-2008, 06:37 PM