Thread: Seadoo O/S Temp Reading
12-22-2014, 09:23 PM #1
- Join Date
- Jan 2013
Seadoo O/S Temp Reading
12-22-2014, 09:48 PM #2
I do not believe there is a sensor to turn back on, on the 2013's.
12-23-2014, 03:58 AM #3
My 2012 RXP-X doesn't have that feature, I have a RS model I dont know if thats has a difference.
12-23-2014, 09:57 AM #4
the "lake water temp sensor" is only available on the 2013 GTX Limited iS 260..
I bought the sensor assy, according to the 2013 GTX iS 260 manual the sensor goes in line with the intercooler inlet hose. That's the easy part! hehe
the hard pard part is wiring the harness into the ECM.. I had the plug end and wire from an old harness, I bought the pins for the ECM and wired it in hoping the ECM would see the input and start showing
the output on the dash, but no dice..... it's in the programming.
I spoke to Jonatan @ V-tech about their download possibly being able to activate the feature, He feels confident that it will work.. I'm planning on buying the tuner and download wnem it gets closer to spring.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By tigerman in forum Sea Doo Open DiscussionReplies: 4Last Post: 05-20-2014, 03:50 PM
By nigel_miguel in forum 2-Stroke PerformanceReplies: 5Last Post: 07-30-2012, 09:27 PM
By robrxp in forum 4-Tec PerformanceReplies: 31Last Post: 05-02-2012, 10:30 AM
By troyg1130 in forum Sea Doo ClassifiedsReplies: 0Last Post: 07-10-2008, 02:55 AM
By fugazi in forum Sea Doo Sport BoatsReplies: 3Last Post: 12-28-2007, 01:24 PM