Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1

    Join Date
    Feb 2014
    Location
    Spain
    Posts
    5

    Stator and magneto 2004 in 2008 rxt 255x

    hello, someone put stator and magneto flywheel assembly belonging to rxp 2004 in a 2008 model ? References change, but if the whole assembly ( stator and magento 2004) is mounted , the power of the coils are equal 380w two , almost equal size , thank you and forgive my translations


  2. #2
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    The lead on the 2004 is different, it has the crank trigger sensor hanging off it. Not sure if you can modify it to suit the later setup.

  3. #3

    Join Date
    Feb 2014
    Location
    Spain
    Posts
    5
    thanks for answering so quickly, the position sensor crankshaft would not change, only the magneto and stator because I have broken and have a rxp 2004 for parts.

  4. #4
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Quote Originally Posted by alberto87 View Post
    thanks for answering so quickly, the position sensor crankshaft would not change, only the magneto and stator because I have broken and have a rxp 2004 for parts.
    The spare 2004 stator you have is different to 2008. The wiring on the 2004 stator is different as it includes the crank trigger wiring on the stator. Can you post a picture of the 2004 stator?

  5. #5
    RXP 260 X Short Course Veteran RXP244's Avatar
    Join Date
    May 2007
    Location
    Auckland, New Zealand, New Zealand
    Posts
    1,244
    +1
    104
    Quote Originally Posted by alberto87 View Post
    thanks for answering so quickly, the position sensor crankshaft would not change, only the magneto and stator because I have broken and have a rxp 2004 for parts.
    Just be sure to use both the mag and stator from the same years. The later year stator will not fit inside the earlier mag cup.

  6. +1 by:


  7. #6
    RXP 260 X Short Course Veteran RXP244's Avatar
    Join Date
    May 2007
    Location
    Auckland, New Zealand, New Zealand
    Posts
    1,244
    +1
    104
    Quote Originally Posted by Sayers View Post
    Quote Originally Posted by alberto87 View Post
    thanks for answering so quickly, the position sensor crankshaft would not change, only the magneto and stator because I have broken and have a rxp 2004 for parts.
    The spare 2004 stator you have is different to 2008. The wiring on the 2004 stator is different as it includes the crank trigger wiring on the stator. Can you post a picture of the 2004 stator?
    The wiring is separate. The stator and crank sensor are independent of each other.

  8. #7
    Sayers's Avatar
    Join Date
    Jul 2010
    Location
    Melbourne AUS
    Posts
    2,300
    +1
    134
    Quote Originally Posted by RXP244 View Post
    Quote Originally Posted by alberto87 View Post
    thanks for answering so quickly, the position sensor crankshaft would not change, only the magneto and stator because I have broken and have a rxp 2004 for parts.
    Just be sure to use both the mag and stator from the same years. The later year stator will not fit inside the earlier mag cup.
    +1, I learnt this the hard way.

    Quote Originally Posted by RXP244 View Post
    Quote Originally Posted by Sayers View Post
    Quote Originally Posted by alberto87 View Post
    thanks for answering so quickly, the position sensor crankshaft would not change, only the magneto and stator because I have broken and have a rxp 2004 for parts.
    The spare 2004 stator you have is different to 2008. The wiring on the 2004 stator is different as it includes the crank trigger wiring on the stator. Can you post a picture of the 2004 stator?
    The wiring is separate. The stator and crank sensor are independent of each other.
    Thanks Mark, was not sure if it was actually part of the stator loom.

  9. #8

    Join Date
    Mar 2006
    Posts
    1,833
    +1
    119
    so, as long as they are used as a matched set, we are good to go updating or backdating? 02-05 mag w. 02-05 stator and 06-current mag w. 06-current stator?

  10. #9
    RXP 260 X Short Course Veteran RXP244's Avatar
    Join Date
    May 2007
    Location
    Auckland, New Zealand, New Zealand
    Posts
    1,244
    +1
    104
    Quote Originally Posted by jim View Post
    so, as long as they are used as a matched set, we are good to go updating or backdating? 02-05 mag w. 02-05 stator and 06-current mag w. 06-current stator?
    I have been doing that and had no problems so far.

  11. #10
    ricky86's Avatar
    Join Date
    Jun 2011
    Location
    the netherlands
    Posts
    302
    +1
    19
    just make sure you use the trigger wheel from the 2008 rxp

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Sea doo CrankShaft 2004 in 2008 + Engine
    By FranciscoFigaroa in forum 4-Tec Performance
    Replies: 6
    Last Post: 09-29-2015, 12:16 PM
  2. compatibility of 4tec stators and magnetos
    By steven mace in forum 4-Tec Performance
    Replies: 0
    Last Post: 07-16-2015, 12:13 AM
  3. FS possible trading in for 2008 rxt and up .lmk
    By rxpredviper in forum Sea Doo 4Tec Skis
    Replies: 6
    Last Post: 08-27-2013, 11:43 AM
  4. WTB - Parts Need a stator and magneto for 2008 RXPX
    By vspec1 in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 01-04-2013, 05:32 PM
  5. WTB stator and magneto
    By piper250 in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 04-29-2011, 09:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •