Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
  1. #1
    DPG98GSXL's Avatar
    Join Date
    Feb 2007
    Location
    East Tennessee
    Posts
    559
    +1
    23

    951 OEM and some HP parts for sale

    I am listing the following parts for a friend. He had a 98GSXL and he sold it and got out of the PWC market...He had these "New" and used parts left over and for sale now. He has listed the PN# and a price on them.
    All parts are + freight in the lower 48 states.
    He will consider all reasonable offers.

    His name is David Schuchter and he lives in the lower Ohio area in case any buyers are from that region.
    His email is [email protected]
    Thanks for looking.

    BTW: He will sell as a whole if someone is interested....

    Seadoo parts for sale:
    1. SeaDoo Pistons - 951 cylinder heads - Qty.2 - p/n 290887775 - $185 for both ( sold for $126 each by Seadoo) **
    2. Skat Trak 12 vein high performance jet pump, prop, & Nozzle for SeaDoo GSX Ltd. 951 Jet ski – Qty 1 for $495 (less than 60 hours)
    3. Rossier Engineering Stage one Top End Head modification kit for 951 engine with three pairs of interchangeable Billet head domes – two of the sets are used with high Octane race gas. Cost is $470 new. This kit has less than 50 hours on them. Make offer
    4. E Z sliders for trailer bunk rails (pkg. of 10-3” wide) manufactured by Power Madd Extreme Motor Sports $30**
    5. Qty. 2 - NGK spark plugs - 4122 BR7HS - $4.00 each**
    6. Qty.1 - Micro Touch Rev limiter p/n MT-REV-SD-97 – fits all 1997 to 1999 Seadoo 785cc and 951cc engines. $65 (NEW)**
    7. Gasket for Carburetor Assy. - p/n 293250066 - Qty. 2 - $2 each**
    8. Gasket for exhaust manifold - p/n 293250081 – Qty. 4 - $8 each**
    9. Gasket for Head Pipe - p/n 293250080 – Qty. 1 - $25**
    10. Fuel Filter – p/n275500089 – Qty.2 - $12 each**
    11. Grommet – p/n293720008 – Qty.1 - $7**
    12. Elbow fitting 90 degrees –p/n 293710070 – Qty.1 - $6**
    13. Carburetor 90mm length hose –p/n 270500308 – Qty.1 - $4**
    14. O-ring – p/n 290931765 – Qty.3 - $8 for all three**
    15. Hose assembly – p/n 270500406 – Qty.1 - $15**
    16. O-rings – p/n 290850460 – Qty.3 - $2 each**
    17. 8mm Hose – 15 foot - p/n 275500345 - $15**
    18. 6mm Hose – 15-foot - p/n 275500139 - $15**
    19. 6mm Tygon Hose – 20ft - $12**
    20. Exhaust Rave valve springs – p/n 271000704 – Qty. 2 - $6**
    **Note: All Seadoo parts and accessories still in bags/box, and never used!!!


    Seadoo Tools
    1. SeaDoo Top dead center Micrometer Gauge (Manufactured by Starrett for SD) - p/n 295000143 (NEW) Can be used on all Jet skis - $250.00
    2. Pusher for impeller shaft end seal and bearing removal - NEW – p/n295000144 - $18
    3. Seadoo Rotary Valve timing angle/degree wheel tool to check Rotary valve opening and closing angles in relation with Magneto side Piston – p/n - $8 (like new)
    4. Seadoo Piston Ring compressor 295000007tool – p/n 290876965 - one pair - $24 (like new)
    5. Seadoo Circlip installer tool – p/n 290877517 - $22 (like new)
    6. Mikunni Pop off pump tester - MK-BN-PMP – Qty, 1 - NEW - $35 (like new)
    7. Engine leak tester – Qty.1 - $15 (like new)
    8. NEW Complete set of Seadoo Oetiker hose clamp crimping and removal plier tools Model 1099, P/N 295000054 (Caillau pliers) , and hose clamp Oetiker pliers 295000069 (model 1090)- $75 for all three tools. Or $40 each.
    9. Seadoo Pump bearing installation tool - p/n 295000107 – Qty. 1–NEW- $20
    10. Hose pincher - p/n 295000076 – Qty. 2 – NEW- $3 each
    11. Lisle Compression gauge tester 0 – 300 PSI - $18 (like new condition)
    12. Seadoo Impeller spline socket removal tool to remove the impeller in the Jet pump housing. Cab be used for XP GSX GTX SPX GTI LE RFI Jet Boats. $15
    13. Impeller shaft guide tool - p/n 295000002 – NEW- $30
    14. Seadoo VTS socket tool- p/n 295000133 – used to install or remove the VTS nut- NEW- $22
    ALL Tools are NEW or like new condition and priced less than internet sales
    Last edited by DPG98GSXL; 12-30-2014 at 07:48 PM.


  2. #2
    I would like to buy a lot of this. I sent him an email.

  3. #3
    DPG98GSXL's Avatar
    Join Date
    Feb 2007
    Location
    East Tennessee
    Posts
    559
    +1
    23
    Scat Trak pump gone
    engine leak tester gone
    hose pinchers gone
    VTS socket tool gone.

    Thanks from "The Shook"

  4. #4
    DPG98GSXL's Avatar
    Join Date
    Feb 2007
    Location
    East Tennessee
    Posts
    559
    +1
    23
    TTT

  5. #5
    DPG98GSXL's Avatar
    Join Date
    Feb 2007
    Location
    East Tennessee
    Posts
    559
    +1
    23
    Updated list below.

    1. SeaDoo Pistons - 951 cylinder heads - Qty.2 - p/n 290887775 - $185 for both ( sold for $126 each by Seadoo) **
    2. Rossier Engineering Stage one Top End Head modification kit for 951 engine with three pairs of interchangeable Billet head domes (42cc, 45cc, &49cc) – two of the sets are used with high Octane race gas. Cost is $470 new. This kit has less than 50hours on them. Make offer!!
    3. Hot Tach II Race Pack Exhaust Gas Temperature digital display with two thermocouples and wiring – Make Offer
    4. E Z sliders for trailer bunk rails (pkg. of 10-3” wide) manufactured by Power Madd Extreme Motor Sports $30**
    5. Qty. 2 - NGK spark plugs - 4122 BR7HS - $4.00 each**
    6. Micro Touch Rev limiter p/n MT-REV-SD-97 – fits all 1997 to 1999 Seadoo 785cc and 951cc engines. Qty. 1- $65 (NEW)**
    7. Gasket for Carburetor Assy. - p/n 293250066 - Qty. 2 - $2 each**
    8. Gasket for exhaust manifold - p/n 293250081 – Qty. 4 - $8 each**
    9. Gasket for Head Pipe - p/n 293250080 – Qty. 1 - $25**
    10. Fuel Filter – p/n275500089 – Qty.2 - $12 each**
    11. Grommet – p/n293720008 – Qty.1 - $7**
    12. Elbow fitting 90 degrees –p/n 293710070 – Qty.1 - $6**
    13. Carburetor 90mm length hose –p/n 270500308 – Qty.1 - $4**
    14. O-ring – p/n 290931765 – Qty.3 - $8 for all three**
    15. Hose assembly – p/n 270500406 – Qty.1 - $15**
    16. O-rings – p/n 290850460 – Qty.3 - $2 each**
    17. 8mm Hose – 15 foot - p/n 275500345 - $15**
    18. 6mm Hose – 15-foot - p/n 275500139 - $15**
    19. 6mm Tygon Hose – 20ft - $12**
    20. Exhaust Rave valve springs – p/n 271000704 – Qty. 2 - $6**
    **Note: All Seadoo parts and accessories still in bags/box, and never used!!!














    Seadoo Tools

    1. SeaDoo Top dead center Micrometer Gauge (Manufactured by Starrett for SD) - p/n 295000143 (NEW) Can be use on all Jet skis- $185.00
    2. Seadoo Rotary Valve timing angle/degree wheel tool to check Rotary valve opening and closing angles in relation with Magneto side Piston – p/n - $8 (like new)
    3. Mikunni Pop off pump tester - MK-BN-PMP – Qty, 1 - NEW - $35 (like new)
    4. NEW Complete set of Seadoo Oetiker hose clamp crimping and removal plier tools Model 1099, P/N 295000054 (Caillau pliers) , and hose clamp Oetiker pliers 295000069 (model 1090)- $75 for all three tools. Or $40 each.
    ALL Tools are NEW or like new condition and priced less than internet sales

  6. #6
    DPG98GSXL's Avatar
    Join Date
    Feb 2007
    Location
    East Tennessee
    Posts
    559
    +1
    23
    Updated list. Some prices have been reduced... He will sell the whole lot if interested.




    Seadoo parts for sale (REDUCE PRICING):
    1. SeaDoo Pistons - 951 cylinder heads - Qty.2 - p/n 290887775 - $150for both ( sold for $126 each by Seadoo) **
    2. Rossier Engineering Stage one Top End Head modification kit for 951 engine with three pairs of interchangeable Billet head domes (42cc, 45cc, &49cc) – two of the sets are used with high Octane race gas. Cost is $470 new. This kit has less than 50 hours on them. Make offer!!
    3. E Z sliders for trailer bunk rails (pkg. of 10-3” wide) manufactured by Power Madd Extreme Motor Sports $30**
    4. Qty. 2 - NGK spark plugs - 4122 BR7HS - $4.00 each**
    5. Gasket for Carburetor Assy. - p/n 293250066 - Qty. 2 - $2 each**
    6. Gasket for exhaust manifold - p/n 293250081 – Qty. 4 - $6each**
    7. Gasket for Head Pipe - p/n 293250080 – Qty. 1 - $20**
    8. Fuel Filter – p/n275500089 – Qty.2 - $10 each**
    9. Grommet – p/n293720008 – Qty.1 - $6**
    10. Elbow fitting 90 degrees –p/n 293710070 – Qty.1 - $5**
    11. Carburetor 90mm length hose –p/n 270500308 – Qty.1 - $4**
    12. O-ring – p/n 290931765 – Qty.3 - $8 for all three**
    13. Hose assembly – p/n 270500406 – Qty.1 - $15**
    14. O-rings – p/n 290850460 – Qty.3 - $2 each**
    15. 8mm Hose – 15 foot - p/n 275500345 - $15**
    16. 6mm Hose – 15-foot - p/n 275500139 - $15**
    17. 6mm Tygon Hose – 20ft - $10**
    18. Exhaust Rave valve springs – p/n 271000704 – Qty. 2 - $5**

    **Note: All Seadoo parts and accessories still in bags/box, and never used!!!













    Seadoo Tools (REDUCED PRICING)
    1. SeaDoo Top dead center Micrometer Gauge (Manufactured by Starrett for SD) - p/n 295000143 (NEW) Can be use on all Jet skis- $165.00
    2. Seadoo Rotary Valve timing angle/degree wheel tool to check Rotary valve opening and closing angles in relation with Magneto side Piston – p/n - $8 (like new)
    3. Mikunni Pop off pump tester - MK-BN-PMP – Qty, 1 - NEW - $30 (like new)
    4. NEW Complete set of Seadoo Oetiker hose clamp crimping and removal plier tools Model 1099, P/N 295000054 (Caillau pliers) , and hose clamp Oetiker pliers 295000069 (model 1090)- $75 for all three tools. Or $40 each.
    ALL Tools are NEW or like new condition and priced less than internet sales

  7. #7
    DPG98GSXL's Avatar
    Join Date
    Feb 2007
    Location
    East Tennessee
    Posts
    559
    +1
    23
    TTT

  8. #8
    DPG98GSXL's Avatar
    Join Date
    Feb 2007
    Location
    East Tennessee
    Posts
    559
    +1
    23
    This guy is ready sell the rest of his inventory....

    [email protected]

    DG

  9. #9

    Join Date
    Mar 2006
    Posts
    1,829
    +1
    119
    still have the EGT setup? I am willing to pay top dollar for new. pm me please and say yes

  10. #10
    DPG98GSXL's Avatar
    Join Date
    Feb 2007
    Location
    East Tennessee
    Posts
    559
    +1
    23
    Quote Originally Posted by jim View Post
    still have the EGT setup? I am willing to pay top dollar for new. pm me please and say yes

    Jim:
    did you email him?

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Cool Pro 785 and 1200 Domestic Parts For Sale
    By bigred70 in forum Polaris Classifieds
    Replies: 26
    Last Post: 03-26-2012, 10:16 PM
  2. FS Cleaning out the cabinet: Some GPR parts For Sale:
    By Pale Rider in forum Yamaha Classifieds
    Replies: 38
    Last Post: 07-05-2011, 11:54 AM
  3. FS OEM SEADOO RXP 215 parts for sale
    By rw40426 in forum Sea Doo Classifieds
    Replies: 5
    Last Post: 05-03-2011, 08:49 PM
  4. FS Some FZS parts for Sale
    By ercBOOSTED in forum Yamaha Classifieds
    Replies: 22
    Last Post: 08-10-2010, 10:26 PM
  5. FS dual primer kit and kawasaki zxi parts for sale cheap!
    By jetdave56 in forum Kawasaki Classifieds
    Replies: 1
    Last Post: 04-05-2010, 07:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •