Thread: 2015 fx svho 85 mph
01-01-2015, 08:27 AM #1
2015 fx svho 85 mph
Purchasing 2015 FX SVHO sending directly to performance shop. Whats best most reliable means of getting to 85 MPH with 3/4 tank 91 octane of fuel, is there a difference in parts from 2014, I do not see 2015 upgrade parts on Riva or R & D sights
01-01-2015, 10:25 AM #2
Same as 14. I got my 14 fx svho there. I'll get you a list posted soon (driving now)
01-01-2015, 10:35 AM #3
01-01-2015, 11:00 AM #4
OK first off your a lucky guy for two reasons. 1. You just acquired a bad ass ski! 2. You get to see the mods laid out in front of you. I, like most, had to figure it out from school of hard knocks by trail error, Tylenol, beer, and a lot of research. I assume you want good holeshot too like me so I am just going to give you the whole ball of wax Here you go buddy:
All this get from Jerry's online store. Use discount code "Greenhulk"
Send ecu off to R&D- R3 reflash. Set limiter to 8850 and boost limiter eliminated
Fizzle intercooler with tial blow off valve
Call up Jim from Jims performance. Get your plate done by him
Buy solas 13/20 prop. Have pitched to 13/18. Jim can do this too.
Leo's pump wedge
Sho exhaust cam ( you will need the gear too if earlier than 2013)
Riva cooling kit and riva strainer
Riva fuel regulator
Riva wide band adaptor
A good wide band of your choice. Online store has a good setup.
L13 cone to get holeshot and rpm's dialed in
R&D grate and pump shoe kit. Good for pump hookup offshore.
(( Today is your lucky day. I have another R&D grate and pump seal kit for your fx if you want it. Perfect shape.)))
R and d spring retainers (can get the whole super single R&D spring/retainer kit if you want. Better bang for buck.
Get tto tach and a boost gauge.
Remove ribbon from intake.
Riva cold air intake and free flow exhaust kits
Hull ventilation holes. Research my threads or pm me about it. It's a must and needs to be done right to avoid water intrusion
Above will get you at 85.
If you want a hair more get adjustable cam gears. Set intake to +5 and exhaust to -2.
The secretive fast guys can go ahead and shake their head at me but I don't give a Damn. I'm here to help guys out and steer them right where I learned wrong. Let me know of any more questions about your fx svho. I did a few more things but to appease me and my style.
01-01-2015, 03:17 PM #5
like I said will be sending to R Rated speed shop and will send them a print out of your information and looks like it will be a recipe for speed. If we need your parts I will PM you but you saved me money and aggravation. Will start process in March and will be in water by May. THANKS AGAIN
01-01-2015, 03:53 PM #6
Good Luck with the build ..
Dont know where you are on the Jersey Shore , maybe we can meet up in May/June do some friendly grudge racing either in the Barnegat or Sandy Hook..
Theres a well known member here with a Sea Doo RXT Turbo down by us,it would make a great three way race in flat then a rough water race,after a few beers somewhere along the Shore somewhere...
01-01-2015, 04:07 PM #7
Located by Island House off Chadwick Island. I have bay front house in Normandy Beach and ride to Barneget inlet and race skis on my whay down. Love to ride/race when new ski is complete.
01-01-2015, 04:15 PM #8
01-01-2015, 04:54 PM #9
01-01-2015, 06:26 PM #10
Why tune for 91 fuel? We have 93 at the pumps! Good luck with the build. Not many fast skis left in nj. Mostly faded out. I look forward to your build. Your in good hands with Rudy @ Rrated!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By LugNutLS1 in forum Yamaha ClassifiedsReplies: 5Last Post: 02-05-2015, 10:02 AM
By ocplayer in forum Yamaha PWC Performance (4-stroke)Replies: 10Last Post: 12-15-2014, 11:15 PM
By curtismarker in forum Yamaha PWC Performance (4-stroke)Replies: 7Last Post: 10-14-2014, 10:54 PM
By Santa Rosa in forum Yamaha PWC Performance (4-stroke)Replies: 3Last Post: 10-13-2014, 05:50 PM
By curtismarker in forum Yamaha PWC Performance (4-stroke)Replies: 35Last Post: 10-02-2014, 03:48 PM