Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1

    Join Date
    Mar 2010
    Location
    the moon
    Posts
    862
    +1
    19

    fiting afr guage kit

    I all happy new year to all. I am going to fit an innovate mtx-l afr kit to my 2008 sho and am hoping to mount the guage in the dash cluster . can some one tell me which s the best place to connect the ignition feed and negative in the cluster. and finally I know there have been loads of threads on afr's but what should my ideal afr be when running.


  2. #2
    LugNutLS1's Avatar
    Join Date
    Jun 2014
    Location
    St. Louis Mo
    Posts
    594
    +1
    53
    Not sure on the cluster wiring but shoot for 11.8 to 12.2. That's the sweet spot under wide open throttle.

  3. +1 by:


  4. #3

    Join Date
    Mar 2010
    Location
    the moon
    Posts
    862
    +1
    19
    thanks for that I will see what im at when I get it fitted.

  5. #4
    AWA MEMBER
    Join Date
    Jan 2008
    Location
    Currituck, North Carolina, United States
    Posts
    4,616
    +1
    247
    I mounted mine in a mirror I use MTX-L also

  6. #5
    lets race.... mikeFZR's Avatar
    Join Date
    Mar 2009
    Location
    MA
    Posts
    4,132
    +1
    205
    Not sure if you are asking about the wiring for the MTX-L, but the bast place to run it from a switched 12v source is the red and yellow wire behind the front access panel. AFRs on a stock/ mostly stock ski at WOT should be around 11.8-12.2.

    Click image for larger version. 

Name:	photo 3.jpg 
Views:	96 
Size:	36.3 KB 
ID:	348936Click image for larger version. 

Name:	image.jpg 
Views:	99 
Size:	52.1 KB 
ID:	348937Click image for larger version. 

Name:	image.jpg 
Views:	97 
Size:	37.4 KB 
ID:	348938

  7. #6

    Join Date
    Mar 2010
    Location
    the moon
    Posts
    862
    +1
    19
    thanks mike that's exactly what I was looking for.

  8. #7
    lets race.... mikeFZR's Avatar
    Join Date
    Mar 2009
    Location
    MA
    Posts
    4,132
    +1
    205
    Quote Originally Posted by razzie View Post
    thanks mike that's exactly what I was looking for.
    No problem. Here are my AFRs with the mods in my sig:

    Idle: 10.8
    2000: 12.1
    2500:13.0-13.2
    3000: 13.9
    4000: 12.8-13.1
    5000: 12.4-12.6
    6000: 12.3-12.5
    7000: 12.0
    7730 (wot): 11.8-12.1 (mostly 11.9)

  9. #8

    Join Date
    Mar 2010
    Location
    the moon
    Posts
    862
    +1
    19
    Quote Originally Posted by mikeFZR View Post
    Not sure if you are asking about the wiring for the MTX-L, but the bast place to run it from a switched 12v source is the red and yellow wire behind the front access panel. AFRs on a stock/ mostly stock ski at WOT should be around 11.8-12.2.

    Click image for larger version. 

Name:	photo 3.jpg 
Views:	96 
Size:	36.3 KB 
ID:	348936Click image for larger version. 

Name:	image.jpg 
Views:	99 
Size:	52.1 KB 
ID:	348937Click image for larger version. 

Name:	image.jpg 
Views:	97 
Size:	37.4 KB 
ID:	348938
    I cannot find this connector can I pick up a 12volt supply from the blue wire on the fuel pump.

  10. #9
    lets race.... mikeFZR's Avatar
    Join Date
    Mar 2009
    Location
    MA
    Posts
    4,132
    +1
    205
    Quote Originally Posted by razzie View Post
    Quote Originally Posted by mikeFZR View Post
    Not sure if you are asking about the wiring for the MTX-L, but the bast place to run it from a switched 12v source is the red and yellow wire behind the front access panel. AFRs on a stock/ mostly stock ski at WOT should be around 11.8-12.2.

    Click image for larger version. 

Name:	photo 3.jpg 
Views:	96 
Size:	36.3 KB 
ID:	348936Click image for larger version. 

Name:	image.jpg 
Views:	99 
Size:	52.1 KB 
ID:	348937Click image for larger version. 

Name:	image.jpg 
Views:	97 
Size:	37.4 KB 
ID:	348938
    I cannot find this connector can I pick up a 12volt supply from the blue wire on the fuel pump.
    Is it different on your 2008 SHO? (mine is a 2009 FZR). I think they are the same. Just to clarify, its the red and yellow wire you want to use, and the blue connector in the first picture is what I used to tap the wire-- just a basic wire tap I picked up at AutoZone.

  11. #10

    Join Date
    Mar 2010
    Location
    the moon
    Posts
    862
    +1
    19
    we call them scotch locks its the actual plug with the 2 wires in that I cannot find I will have another look. f not I ma ru a wire fm the battery with a relay and connect to some where else.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Innovate AFR guage kit RED
    By 02gpR in forum Yamaha Classifieds
    Replies: 12
    Last Post: 06-21-2011, 09:28 AM
  2. AFR Guage.
    By Waterholics in forum Yamaha PWC Performance (4-stroke)
    Replies: 1
    Last Post: 02-14-2011, 03:11 PM
  3. AFR Guage etc...
    By WannabeGoing80 in forum 4-Tec Performance
    Replies: 3
    Last Post: 07-26-2009, 09:05 AM
  4. Anyone used this AFR guage
    By SeaGoat in forum 4-Tec Performance
    Replies: 1
    Last Post: 01-03-2009, 01:51 AM
  5. AFR guages
    By skoepp in forum 4-Tec Performance
    Replies: 13
    Last Post: 03-13-2008, 01:47 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •