Thread: Sea Doo RXT-X 260 IBR Problem
01-05-2015, 11:11 AM #1
- Join Date
- Jan 2015
Sea Doo RXT-X 260 IBR Problem
I have 2011 Sea Doo RXT-X 260 and this weekend I've been with the sixth motorcycle show and Saturday.
During the day Saturday walked normally. at the end of the day I stopped the bike and when I called again began to show errors and the light of IBR and Check Engine.
The bike works normally and try to speed up and back but the bike goes nowhere.
01-05-2015, 12:06 PM #2
Check battery voltage when ski is off and at idle. If voltage when running is below spec, check battery and/or voltage regulator (rectifier). When I had a C2101 code come up on mine, the manual said it was an "IBR actuator movement warning"...however, replacing my throttle body fixed the issue. The P1661 code is circumstantial to the source issue.
Have you ever replaced the IBR bushings?
Do you have a way to clear codes? (Candoopro)
BTW: Because the ski goes in limp mode, I feel confident its the throttle body.
01-06-2015, 02:22 PM #3
- Join Date
- Oct 2007
Is Very easy , start engine and Pull up and down rieverse gate is possible you have this problem, this test on trailer. How many hours have?
01-07-2015, 03:36 AM #4
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Nunodalu in forum 4-Tec PerformanceReplies: 16Last Post: 07-09-2015, 02:45 PM
By jordanmow in forum 4-Tec PerformanceReplies: 47Last Post: 09-14-2014, 05:44 PM
By Dion in forum Open DiscussionReplies: 2Last Post: 05-01-2014, 03:55 PM
By MikeTrin in forum The Watercraft JournalReplies: 3Last Post: 12-09-2013, 10:12 AM
By Sdefreit in forum Sea Doo Open DiscussionReplies: 16Last Post: 10-21-2010, 04:08 PM