01-06-2015, 06:27 PM #1
Kanaflex intake mod on 2013 fzr. Awesome gains!
So today I went out on my ski with a seadoo friend. We both made our intakes using the factory kanaflex. Well on my ski. 2013 fzr. I made this below. I ran the factory kanaflex to my custom 4" intake. I cut it to length but not to short so I can put it back like stock when I ride in rough water. Well anyways. For those that are wondering I'm on a completely stock 2013 supercharger so boost is minimal at best but my factory kanaflex didn't suck shut one bit! People say it will but I had no issues at all.
So we got the skis loaded up and headed up to the river where water is still brackish but very calm and usually has a perfect ripple. Here is my last speed record from after the fizzle install.
Which is still a great mph for a stock blower wheel with the fizzle on stock cooling.
Well first off this thing now sounds like a jet! Anyways we made it up river and my fuel was just above half tank. First pull at our top speed spot bam! 78.9!!! I was in shock! I said no way did this just happen.
So we rode some more. Decided let's do another pull. Bam! 79.1!!!! In shock again!
Less fuel but still!!
Then we rode some more and was now a 1/4 tank 1 bar. No beeping yet. But I decided I'm at my lowest so let me make one more pull. In shock again! 79.4!!! Lol the ski pulls so much harder its amazing
01-06-2015, 06:29 PM #2
Anyways the results don't lie and I am impressed!! The times are in all three pics of my progression today with the date. Thursday is suppose to be a pretty cold day so I'm trying to hit 80mph on a stock supercharger! This stuff is fun!
01-06-2015, 07:13 PM #3
01-06-2015, 08:07 PM #4
What other mods do you have if you do not mind me asking.
I too have 13' FZ and I will be on my quest for 80mph soon.
01-06-2015, 08:26 PM #5
- Join Date
- Jan 2008
- Currituck, North Carolina, United States
he runs that awesome Vtech 3 flash no one uses lol
01-06-2015, 08:41 PM #6
We need to run a filter around here. I ventilated hull and got same gains
01-06-2015, 10:45 PM #7
as of now my mods are:
Foam inserts removed
Custom 4" cold air intake with factory Kanaflex connected pulling outside air.
R&D Ribbon delete
Tommy Jordan factory exhaust mod
R&D intake grate and pump seal
Jims cut 2014 fzr svho ride plate
V-tech stage 3 flash
fizzle Y1000 on factory cooling(will be adding dedicated line next week)
Tial 50mm BOV
01-06-2015, 10:54 PM #8
01-06-2015, 10:56 PM #9
Awesome. I picked up 1.5mph (maybe a hair more) by simply ventilating my hull in a couple locations with FrogSkinz vents.
01-06-2015, 10:57 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Slamdcoop0428 in forum Yamaha PWC Performance (4-stroke)Replies: 0Last Post: 08-27-2014, 07:21 AM
By GlossyHorse in forum Yamaha PWC Performance (4-stroke)Replies: 9Last Post: 03-08-2014, 06:42 AM
By mhagley in forum Yamaha PWC Performance (4-stroke)Replies: 5Last Post: 03-05-2014, 05:04 PM
By jpt7779 in forum 4-Tec PerformanceReplies: 10Last Post: 08-30-2008, 07:00 PM
By Green Hulk in forum 4-Tec PerformanceReplies: 38Last Post: 06-23-2005, 11:53 PM