Results 1 to 6 of 6

Thread: Scer slip

  1. #1

    Join Date
    Jul 2012
    Location
    St cloud FL.
    Posts
    128
    +1
    6

    Scer slip

    Hey guys i just spend 2 hrs reading about scer clutch adjustment. My head is spinning with all the different numbers on clutch adjustment. I am just wondering whats the correct setting for a oem charger rebuilded with the oem kit. It was put together only using oem parts from the oem kit. Charger is from a 06 rxt 215. All went together really easy. All seems to be good but just wants to be sure about the correct slip adjustment.
    Thanks in advance.


  2. #2
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,058
    +1
    790
    Around 110in.lbs is what they normally are.

  3. +1 by:


  4. #3
    ncdoo's Avatar
    Join Date
    Nov 2007
    Location
    Eastern NC
    Posts
    1,351
    +1
    105
    Seadoo recommends between 80 and 124 in/lbs on a fresh rebuild.

  5. #4

    Join Date
    Jul 2012
    Location
    St cloud FL.
    Posts
    128
    +1
    6
    Thanks guys i was actually getting about 8 ft/lbs. when converted is actually inbetween those specs.

  6. #5
    SLASHER's Avatar
    Join Date
    Jun 2007
    Location
    Australia, Perth WA
    Posts
    3,263
    +1
    474
    For every pound of boost = that for slip ...

    i.e. 8 pound sc = 8 pound slip

  7. #6
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    Location
    South Chicagoland
    Posts
    14,688
    +1
    846
    As Austin stated,110 inch lbs is were you want to pre-load an 8 lb, OEM charger to...As the charger is run the slip should fall off to around 85/90 inch lbs..which is perfect...

  8. +1 by:


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. My Clutch Failed the test bad, but never slipped
    By Shibby1485 in forum 4-Tec Performance
    Replies: 4
    Last Post: 03-16-2006, 10:32 PM
  2. RR SCer Impellor VS. Riva Vortec SCer Impellor?
    By Water4fire in forum 4-Tec Performance
    Replies: 4
    Last Post: 01-06-2006, 08:06 AM
  3. clutch slipping question
    By carlo4tech in forum 4-Tec Performance
    Replies: 2
    Last Post: 11-15-2005, 11:18 AM
  4. Perfect torque wrench for measuring clutch slip moment
    By Green Hulk in forum 4-Tec Performance
    Replies: 9
    Last Post: 09-10-2005, 09:29 AM
  5. Clutch Slip?
    By Tube Master in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-31-2005, 11:02 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •