Results 1 to 6 of 6
  1. #1

    2007 Seadoo Wake SC Bellows replacement

    Ive been searching for a video or write up that tells me how to replace the Bellows and Bearing on my 2007 Seadoo Wake SC. I believe its leaking oil at high RPMS. I had a oil leak issue on my 04 GTX before that turned out to be the oil cooler o rings but its not leaking in that location on this ski.

    DO i need to remove the drive shaft or can i slide the motor forward? whats the best way of doing it and do i need any special tools. The dealership wanted 400 in labor to replace the part.


  2. #2
    Tiny's Avatar
    Join Date
    Sep 2006
    Location
    The Atl
    Posts
    3,561
    +1
    578
    If you move the motor forward, then you will need to align the motor.

    Removing the pump and drive shaft is the best way to do it....

  3. #3
    If you unbolt the motor from the mount without unbolting and moving the mount itself why would have have to re aline it ?

  4. #4
    Will i need any special tool to pull out the c clip holding the drive shaft in place?

  5. #5
    Ken62465's Avatar
    Join Date
    Apr 2011
    Location
    Gardner, MA
    Posts
    582
    +1
    48
    Quote Originally Posted by Joshua Kinne View Post
    Will i need any special tool to pull out the c clip holding the drive shaft in place?
    I bought this one and worked nicely.
    http://www.ebay.com/itm/Sea-Doo-Driv...3d96e3&vxp=mtr

    I've done a ton of 2 strokes and no tool is needed but these 4techs way more preload and you won't budge it if at all. Pop c clip with tool...remove pump...remove driveshaft. Don't unbolt the motor by any means or alignment is sure to end up off.

  6. #6
    Ken62465's Avatar
    Join Date
    Apr 2011
    Location
    Gardner, MA
    Posts
    582
    +1
    48
    Quote Originally Posted by GoneRXT View Post
    If you unbolt the motor from the mount without unbolting and moving the mount itself why would have have to re aline it ?
    Because the mounts form a v and you'll find slots under those bolts allowing the motor to pivot and toss off the alignment if you unbolt it.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Seadoo wake pro bellow and bearing replacment
    By mic1623 in forum 4-Tec Performance
    Replies: 6
    Last Post: 04-14-2015, 12:09 PM
  2. 2007 SeaDoo GTX - SC washers
    By golfgibson in forum 4-Tec Performance
    Replies: 1
    Last Post: 03-19-2012, 12:23 PM
  3. 2007 Seadoo Wake Help
    By Asmarine in forum 4-Tec Performance
    Replies: 4
    Last Post: 06-10-2009, 05:38 PM
  4. Only Now 2007 SeaDoo Wake 215HP JetSki Like New 6Hrs
    By Keddano in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 05-05-2009, 08:09 PM
  5. 2007 Seadoo RXP: SC Clutch Failure
    By SaskRXP07 in forum Sea Doo Open Discussion
    Replies: 57
    Last Post: 07-26-2007, 03:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •