Thread: TPS Reading on Seimens ECU
02-17-2015, 06:48 PM #1
TPS Reading on Seimens ECU
I've noticed my 06 RXP w/ 08 electonics was down 300-400 RPMS so we started trouble shooting with the can-doo system. I'm only showing 80% throttle on the live monitoring even when the butterfly is wide open. We tried multiple throttle bodies, TPS sensors and two different ecu's with the same result. Most we saw was 84.7% and that was when I manually held the throttle body open as far as it would go. This actually confused me because the butterfly was open past dead center and was actually restricting more airflow. My question is,Does anybody know what their TB's are reading at wide open throttle with a Siemens ECU? Just trying to get a baseline here.
02-17-2015, 07:23 PM #2
Siemens reports angle and not percent like the Bosch. Idle angle is between 4-8 deg so WOT should be 86-82ish.
02-17-2015, 07:27 PM #3
Thank you sir! my problem lies elsewhere then
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By DR2006RXP in forum 4-Tec PerformanceReplies: 80Last Post: 05-05-2014, 11:22 AM
SOLD CMD for seimens ECUBy Steve-m31164 in forum Sea Doo ClassifiedsReplies: 4Last Post: 01-21-2014, 06:45 PM
By tchies in forum 4-Tec PerformanceReplies: 3Last Post: 09-16-2012, 08:26 AM
By Vern in forum 4-Tec PerformanceReplies: 4Last Post: 08-04-2009, 02:33 PM
By camar0 in forum 4-Tec PerformanceReplies: 7Last Post: 06-22-2009, 06:46 PM