Page 1 of 2 1 2 LastLast
Results 1 to 10 of 13
  1. #1
    Branden's Avatar
    Join Date
    Aug 2014
    Location
    Cape Coral, Fl
    Posts
    1,600
    +1
    321

    What wire to tap for wideband

    What wire are you guys tapping into for power in a new rxpx?


  2. #2
    mikebigs's Avatar
    Join Date
    Mar 2012
    Location
    River Crew CT
    Posts
    56
    +1
    3
    not sure if new skis are different, but i tapped into the purple wire on the harness for my 07 rxp

  3. #3
    It is best to have the wideband powered up only when the fuel pump is running.

  4. #4
    Gus13letter's Avatar
    Join Date
    Apr 2008
    Location
    Tampa Bay, FL
    Posts
    8,133
    +1
    821
    I am not sure if you did or not have the SCOM installed at one point, but if you had the SCOM, you can use the trigger wire that went to the diagnostic port. It is the one I used so I didnt have to splice any factory wires and looks factory. See, the SCOM was good for future mods too.
    If not then you will have to tap into a factory wire. I think it was one of the purple ones, but I would have to check which one exactly.

  5. +1 by:


  6. #5
    hkss's Avatar
    Join Date
    Oct 2014
    Location
    Germany Karlsruhe
    Posts
    615
    +1
    59
    sorry but I dont understand the question.
    @Branden I guess - you are asking how to power up the o2-Sensor without Datalogger or without AFR Controller conneted?
    Is this the question?

  7. #6
    Gus13letter's Avatar
    Join Date
    Apr 2008
    Location
    Tampa Bay, FL
    Posts
    8,133
    +1
    821
    He wants to install an AFR gauge which requires a switched power source.
    I know there is a thread on this, but I haven't had a chance to look for it and I don't remember which one exertions uses off hand. If it's not answered, I'll find it for ya.

  8. #7

  9. #8

  10. #9
    Branden's Avatar
    Join Date
    Aug 2014
    Location
    Cape Coral, Fl
    Posts
    1,600
    +1
    321
    Thanks Gus! I think I am just going to grab power from one of the purple wire instead of going through ordering the harness deal. on a side note these look pretty cool:


  11. #10
    RXPJAY's Avatar
    Join Date
    Nov 2012
    Location
    Sudbury, Ontario
    Posts
    847
    +1
    93
    Click image for larger version. 

Name:	IMG_1261.jpg 
Views:	91 
Size:	49.6 KB 
ID:	351895Soon it will look like this!!

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. what size drill and tap for wideband
    By Branden in forum 4-Tec Performance
    Replies: 27
    Last Post: 04-23-2015, 08:55 PM
  2. what line to tap for boost gauge?
    By alfmoney in forum Honda Performance
    Replies: 7
    Last Post: 03-07-2009, 11:58 PM
  3. What clamps to buy for RXT-X??
    By gqllc in forum 4-Tec Performance
    Replies: 8
    Last Post: 02-27-2008, 07:41 PM
  4. what oil to use for tropical temp.
    By carlo4tech in forum Kawasaki PWC Performance (4-stroke)
    Replies: 5
    Last Post: 11-04-2007, 08:10 PM
  5. what oil to use for oil change
    By macattack in forum 4-Tec Performance
    Replies: 7
    Last Post: 08-15-2005, 08:18 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •