Thread: 1995 slt 750 piston wash
02-20-2015, 10:54 PM #1
1995 slt 750 piston wash
my brother picked up some skis and one is a 1995 slot 750, i have learned a lot from here about my sl 750 same year but i wanted to get a second opinion on his wash...
the pto and mag pistons look as if water is getting on them to me, the domes look cleaned off
the cen piston wash looks about right, about a fingernail width of wash
another note, those head gaskets look a little odd to me, the water holes are tiny, going to replace them anyways.
Any opinions would be appreciated!
02-21-2015, 12:49 PM #2
PTO and Mag look either rich or water ingested. ( which could be bad)
To me, center is a little leaner than I like.
02-22-2015, 06:52 AM #3
I agree with John. Water in two, lean on the other. The early 750 head gaskets had very small holes for cooling. They don't look odd to me, just the older version. You should replace as you planned due to the possible water ingestion.....
02-27-2015, 12:37 PM #4
Last edited by Trent_sl750; 02-27-2015 at 01:57 PM.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By wfd in forum Polaris How To & FAQsReplies: 2Last Post: 04-29-2012, 09:59 AM
By sinclair in forum Polaris Open DiscussionReplies: 0Last Post: 06-25-2008, 03:21 PM
By sinclair in forum Polaris How To & FAQsReplies: 4Last Post: 06-24-2008, 03:47 PM
By jarcynvicnchris93 in forum Polaris ClassifiedsReplies: 1Last Post: 06-05-2008, 08:02 PM
By daveo13 in forum Polaris Open DiscussionReplies: 7Last Post: 09-08-2006, 03:59 PM