Results 1 to 5 of 5
  1. #1
    yz450f's Avatar
    Join Date
    Aug 2008
    Location
    Long Island NY
    Posts
    657
    +1
    6

    2 inch pump spacer on gp800r?

    I've done a search and found a lot of great info about runnin the two inch pump spacer in the 1200 and 1300. Has anyone ever used it on the 800? I have my pump out and sending my ride plate to island racing and just figured if I got it apart I could buy the parts and cable extensions and put it back together if it makes a good combo with the modded ride plate.


  2. #2
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Location
    Houston, Texas
    Posts
    12,801
    +1
    450
    on that year boat all you need is the 30" driveshaft and the cable extensions

    I should have both

  3. #3
    yz450f's Avatar
    Join Date
    Aug 2008
    Location
    Long Island NY
    Posts
    657
    +1
    6
    Ok thanx! I have a press at my shop I can swap the shafts out with. Then all I need is the extension and dowel pins.
    I want to run this pump with a wedge in combination with my ride plate modded by island racing.




    Quote Originally Posted by WFO View Post
    on that year boat all you need is the 30" driveshaft and the cable extensions

    I should have both

  4. #4
    jdmforlife's Avatar
    Join Date
    Oct 2009
    Location
    Naples, FL
    Posts
    57
    What are you looking to gain by doing this???

  5. #5
    yz450f's Avatar
    Join Date
    Aug 2008
    Location
    Long Island NY
    Posts
    657
    +1
    6
    I have read a lot of 12 and 1300 guys run the 2 inch spacer and say if you don't have it get it. But I decided my money is better spent on island racing modding my ride plate and re pitching my impellar slightly.




    Quote Originally Posted by jdmforlife View Post
    What are you looking to gain by doing this???

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB 2 inch Pump Spacer
    By H204YOU in forum Yamaha Classifieds
    Replies: 8
    Last Post: 02-19-2009, 01:47 PM
  2. Pump wedge on wifes RXT
    By BJTKRXPHD in forum Sea Doo Open Discussion
    Replies: 11
    Last Post: 06-23-2006, 05:34 PM
  3. '05 Pump Upgarade On '01 GPR Driveshaft ?
    By RaystownLake GPR in forum Yamaha PWC Performance (2-stroke)
    Replies: 23
    Last Post: 06-15-2006, 07:04 AM
  4. Pump wedge on rxp.
    By Snoman in forum 4-Tec Performance
    Replies: 33
    Last Post: 06-08-2006, 06:30 PM
  5. R&D ride plate hitting on pump/nozzle on 03 1300 ??
    By slow1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 13
    Last Post: 05-28-2006, 11:39 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •