Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1

    Just picked up a mag pump 164mm with prop... 3 blade Prop is for sale 18/30 +400hp

    Anybody in the market 3 blade skat trak prop 18/30 for a 164mm mag pump... I need to get closer to a 17/22 or 23... Skat trak can re pitch possibly but that is an extreme re pitch so if I can sell it for $275 shipped I can just start new and right.. Oh also this prop only has 3hrs max on it...
    Thanks
    Jess
    813 363 9074


  2. #2

    Join Date
    Mar 2006
    Posts
    1,833
    +1
    119
    post up some pics of that MONSTER. Do you realize how much HP you would need to run a 17/22 or 17/23 Skat 3 blade 164 mm? You may want to post a new thread topic to get some ideas before you place the order with Glen-- I personally have a $500 paper weight

  3. #3
    yes... I have 325hp and 16-18psi of boost at 8800 rpms.. Chris at Eastsidepowersports is building the motor as we speak.. I understand its not needed in my build but I love skat trak mag pumps and support those guys when I can.. I also am not trying to set up for crazy topend I may turn this ski into a freestyle wake jumping ski believe it or not!! OH and I only paid $1100 for the pump with prop and only 3hours on it!!! steal!!

  4. #4
    plus I can pull the pump for the next build or upgraded ski!!

  5. #5

    Join Date
    Mar 2006
    Posts
    1,833
    +1
    119
    your 200 or so hp down for what you need for your projected impeller. Good luck

  6. #6
    Quote Originally Posted by jim View Post
    your 200 or so hp down for what you need for your projected impeller. Good luck

    I talked to Greg at skat trak and those were his recommendations. I am not running the 18/30 I am selling it..

  7. #7
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,071
    +1
    790
    Wow, I remember talking to Glenn at Skat when I did my Mag pump for my conversion. It had a 68-140Le and IMO around 330hp with motec and all. That prop is monster. Even the one you want to get.

    Did Glenn Tell you for every MM in pump size you can drop the Prop size by the same mm? That's 5mm?
    I don't remember his call as it was 4 years ago with that ski, but hell even my Motec powered RXPX didn't need a prop that big.

    Anyway good luck I love the Pull of the skats... Hold the frick on.

    Were are you in Austin? I work there and parents live on Travis, although I live in New Braunfels now.

  8. #8
    Quote Originally Posted by Water4fire View Post
    Wow, I remember talking to Glenn at Skat when I did my Mag pump for my conversion. It had a 68-140Le and IMO around 330hp with motec and all. That prop is monster. Even the one you want to get.

    Did Glenn Tell you for every MM in pump size you can drop the Prop size by the same mm? That's 5mm?
    I don't remember his call as it was 4 years ago with that ski, but hell even my Motec powered RXPX didn't need a prop that big


    Anyway good luck I love the Pull of the skats... Hold the frick on.

    Were are you in Austin? I work there and parents live on Travis, although I live in New Braunfels now.
    cedar park tx... ride on travis if there is water or austin for a cruz!!! do you come up for the freeride in Aug. Austin Jetskiers event..

    I am not running the 18/30... I am going with the 17/23ish... Is that wrong.. Fyi this time around I spoke to greg not glen.. Glen was out...

  9. #9
    Quote Originally Posted by jim View Post
    your 200 or so hp down for what you need for your projected impeller. Good luck
    I would think Greg would be that far off.. I will give Glen a call one I am ready to buy the prop and ask him.. Maybe greg was thinking another ski some how...

  10. #10
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,071
    +1
    790
    What SCer? ET 137+4mm or 68-140Le? 70-145 Race?

    I ran a Bent 15-22R with a 68-140 and was Spot on, but that was a stock 159mm pump. So IMO your gonna need a Big ass SCer to pull that prop to 8800RPM/s in that big of a pump. Get with Glenn as Also IMO he is the best.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Just picked up my 2000 ultra 150 with 29 hOurs on it! I'm back!!!
    By waverider1200 in forum Kawasaki PWC Performance (2-stroke)
    Replies: 20
    Last Post: 02-21-2015, 02:14 PM
  2. Replies: 2
    Last Post: 04-25-2012, 06:45 AM
  3. Just picked up a 95 xp (720)
    By ADAMBOMB in forum 2-Stroke Performance
    Replies: 4
    Last Post: 06-29-2007, 09:33 PM
  4. just picked up my ultra 250
    By GDM in forum Kawasaki PWC Performance (4-stroke)
    Replies: 6
    Last Post: 04-30-2007, 09:57 PM
  5. Just Picked up my '06 RXP
    By ramnj in forum Sea Doo Open Discussion
    Replies: 32
    Last Post: 04-08-2006, 05:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •