Thread: Long "reach" open end wrench?
03-14-2015, 01:39 PM #1
Long "reach" open end wrench?
So hard to explain but what I am looking for is an open end wrench that is longer than normal (not the wrench itself but the opening the nut / bolt goes into). Reason is (again hard to explain) is that there is a pin right next to the nut so you cannot put a box end or a socket over the nut, this will allow me to "straddle the pin"
Thank I hope there is a tool guy on here that can help me
03-14-2015, 08:01 PM #2
- Join Date
- Jul 2005
- Central North Carolina
I don"t know what size nut your removing but maby you could mill/grind the center section of the wrench back enough to make the depth of the wrench deeper to fit over the nut and pin at the same time. You would need a good quality wrench and not a cheep wrench to do this to. Tommy Jordan
03-14-2015, 11:46 PM #3
03-17-2015, 08:19 PM #4
03-17-2015, 08:53 PM #5
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By FLjoyrider in forum Polaris ClassifiedsReplies: 47Last Post: 04-13-2010, 05:22 AM
By RX951 in forum Open DiscussionReplies: 5Last Post: 02-20-2007, 12:37 AM
By ugadawg131 in forum Polaris Open DiscussionReplies: 2Last Post: 01-23-2007, 07:55 PM
By javiert99 in forum Sea Doo Open DiscussionReplies: 2Last Post: 10-03-2006, 04:47 PM
By 11 in forum Sea Doo Open DiscussionReplies: 2Last Post: 01-09-2006, 10:33 AM