Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1

    How to eliminate the rear squirter on fzs

    How do i re-route it or stop it from squirting up in the air?


  2. #2
    You can disconnect it, plug it, put an on/off valve... There is different ways. Up to you. Performance isn't affected in anyway

  3. #3
    mattydipps's Avatar
    Join Date
    Mar 2013
    Location
    Babylon, Long Island
    Posts
    652
    +1
    51
    Quote Originally Posted by d00m View Post
    How do i re-route it or stop it from squirting up in the air?
    Some people just pull the hose off the bottom and let it hang there while riding..

    I personally cut and put a little valve inside the line so I can turn it on and off when I want to... I can't seem to find the link on my Amazon for what I bought but I'm sure someone else will chime in with a correct valve..

  4. #4
    Ski Hacks MG's Avatar
    Join Date
    Apr 2013
    Location
    Georgia
    Posts
    5,253
    +1
    990
    Remove hose from gay spray fitting under rear deck, plug off any way you see fit and enjoy.

  5. #5

    Join Date
    Mar 2014
    Location
    Siesta Key, Fl
    Posts
    1,066
    +1
    155
    I just used a vacuum port cap and a Stainless clamp around it. A better cap would be a heater core block off cap. They are much stronger but I just had the vacuum cap laying around.

  6. #6
    lets race.... mikeFZR's Avatar
    Join Date
    Mar 2009
    Location
    MA
    Posts
    4,134
    +1
    205
    I used 200psi hose from Lowes and a brass valve. As others have mentioned, there are a million different ways to do it.

  7. #7
    mwend's Avatar
    Join Date
    Jan 2014
    Location
    Racine, WI
    Posts
    112
    +1
    8
    I've used a 1/2" PEX Straight Crimp Stop Valve and 2 SS hose clamps spliced into the current hose.
    Has worked great. Easy on / Off (For my VX -pretty sure it was 1/2"- but it was a small PEX valve)

  8. #8
    The Rooster's Avatar
    Join Date
    Dec 2012
    Location
    S.E. Louisiana - Ponchatoula
    Posts
    912
    +1
    169
    Black rubber stopper. .25 cents. !!!

  9. #9
    OzarkYamMonster's Avatar
    Join Date
    Oct 2012
    Location
    Lake Of The Ozarks
    Posts
    2,153
    +1
    295
    I simply removed hose. Plugged the tube opening with JB Weld. Been there now over 2 years no issues.

  10. #10
    64physhy's Avatar
    Join Date
    Aug 2010
    Location
    Weatherford, TX
    Posts
    1,725
    +1
    168
    I have one that's filled with JB weld, and one that I tapped and put a stainless bolt in.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2-Stroke how to change the rear traction pad that uses the rivits
    By 04gp1300r in forum Yamaha Projects & Build Threads
    Replies: 3
    Last Post: 05-23-2013, 08:48 AM
  2. How to reset the working hours on the jet ski polaris 785 Pro
    By deba-os in forum Polaris How To & FAQs
    Replies: 8
    Last Post: 04-21-2011, 09:46 PM
  3. How to remove the Servo motor on a 1300r
    By slydogge in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 07-20-2010, 03:06 PM
  4. Replies: 1
    Last Post: 03-30-2010, 01:51 PM
  5. How to run the water hoses on this TWIST head?!
    By Crazy685 in forum 2-Stroke Performance
    Replies: 9
    Last Post: 10-29-2009, 09:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •