Thread: svho stage 2 install please help
03-22-2015, 01:27 PM #1
- Join Date
- Mar 2015
svho stage 2 install please help
hi guys I recently purchased stage 2 kit for my fzs svho from r and d. im a little confused about my impeller situation. They sent me a skat prop and on the box it says is a 13/18 swirl and its scribbled over with 13/19 pro pitch? On the inside of the impeller it has 13/18 engraved in it?(Looks like someone did it by hand) Is this the right prop I should be running? I mostly do flat water riding and was hopin to hit the 80mph mark. Also im finishing up installing the pro cooling kit and was wondering if it was worth pulling the thermostat since it seems like some guys are having problems with their skis running at the right temps. I only ride it in the summer and water temps are always above 60.
03-22-2015, 03:52 PM #2
I believe they order props and have a guy pitch them on a pitch block to make sure your getting what you need. A lot of times a prop right out of the box isn't even close to what you order. I ordered a 15/20r and it measured 15/22.5. Throw it on and test it. You can always get it pitched to dial in whatever rpm you desire.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By holdnon72 in forum Sea Doo Sport BoatsReplies: 1Last Post: 12-31-2007, 10:59 AM
By holdnon72 in forum Sea Doo Open DiscussionReplies: 8Last Post: 12-25-2007, 01:38 PM
By 04RXP22 in forum 4-Tec PerformanceReplies: 4Last Post: 09-13-2007, 07:50 PM
By CRAZEDRXP in forum 4-Tec PerformanceReplies: 3Last Post: 05-31-2007, 07:27 PM
By holdnon72 in forum Sea Doo Sport BoatsReplies: 2Last Post: 04-25-2007, 02:03 PM