Thread: ET 17 Supercharger wheel
03-23-2015, 09:25 PM #1
ET 17 Supercharger wheel
I have a low hour ET17 wheel for a 2014 SVHO and up, its also the same wheel ET makes for Riva SVHO F1 line.
Retail is $580 will sell for $400 This wheel makes 2 psi of boost over the stock 2014 wheel with much harder acceleration. This is a drop in wheel for the 2014 models. Its safe to run on the stock supercharger shaft with a blow off valve. This setup runs great with a reflash, I used a R&D setup with 91 octane fuel.
This can also be used on older superchargers for huge gains with two extra items.
I have a stock 2014 back plate that the wheel fits if needed. The only thing you would need to do is send your stock front housing to Art at ET and have
it bored for the larger wheel if you have a older charger. I also have a spare front housing I will sell that can be bored for the larger wheel if
you wanted to do a complete kit and keep your old setup.
Just let me know if you need the parts to use on the older chargers.
Last edited by YudLuz2; 03-23-2015 at 10:31 PM.
03-23-2015, 09:55 PM #2
03-23-2015, 10:30 PM #3
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By cp4ufl in forum Sea Doo ClassifiedsReplies: 0Last Post: 05-21-2008, 11:51 AM
By dave911rsr in forum 4-Tec PerformanceReplies: 3Last Post: 03-15-2008, 04:35 PM
By dochere195 in forum 4-Tec PerformanceReplies: 5Last Post: 07-17-2007, 10:36 PM
By codymouse54321 in forum 4-Tec PerformanceReplies: 18Last Post: 07-05-2007, 08:16 PM
By green05rxt in forum 4-Tec PerformanceReplies: 10Last Post: 06-06-2007, 03:11 PM