Thread: Any advise on hitting 85 MPH
03-24-2015, 03:09 PM #1
Any advise on hitting 85 MPH
I am trying to hit the 85 MPH mark, any suggestions on what I can do next? Don't really want to go to a different supercharger wheel. my mods are listed in signature, this was my best speed so far and was consistent at this speed on three different runs, with 3/4 to 1/2 tank of fuel and my RPM was 8460.
03-24-2015, 03:16 PM #2
03-24-2015, 03:18 PM #3
1. Get rid of the R&D plate and have Jim cut your stock plate.
2. Tune the hull, meaning setup the pump, transom and ride-plate for smooth transitions.
3. May look into the R3.
03-24-2015, 03:19 PM #4
Get modified intake grate/ride plate from Dean Charrier or Jim...And work with a real custom tuner to dial it in...(possibly rev higher)
03-24-2015, 03:49 PM #5
yeah I've got the hull dialed in pretty well with current setup, I have tried shimming ride plate a million different ways and the current setup has proven best. guess I need to try Jim's cut on my plate. Didn't realize Jim or Dean did the intake grates?
03-24-2015, 04:14 PM #6
Dean mods stock grates...not sure if Jim does...
03-24-2015, 04:14 PM #7
03-25-2015, 08:05 AM #8
- Join Date
- Jan 2008
- Currituck, North Carolina, United States
IPut a et18 in and load it up I get 84.7 and a few 85.3 with my setup oh shit svho nevwemind
Last edited by JoeyDFZS; 03-25-2015 at 08:38 AM.
03-25-2015, 10:03 AM #9
- Join Date
- Aug 2012
plate and 200 more rpms
03-25-2015, 01:05 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By vdubspeed in forum Yamaha Old School SkisReplies: 8Last Post: 09-09-2014, 12:26 PM
By k.perry408w in forum Yamaha How To & FAQsReplies: 1Last Post: 07-04-2013, 11:08 PM
By bobluen in forum Kawasaki PWC Performance (2-stroke)Replies: 3Last Post: 08-17-2007, 09:10 PM
By Bruins in forum 2-Stroke PerformanceReplies: 2Last Post: 06-28-2007, 10:36 AM
By Drink My Dust in forum Yamaha PWC Performance (2-stroke)Replies: 11Last Post: 04-07-2006, 07:29 AM