Thread: Complete 2002 gp1200r
03-25-2015, 02:06 AM #1
Complete 2002 gp1200r
MOTOR IS SOLD. ALL Parts will be marked as they are sold for ease of reading.
Motor comes with flywheel, cases, welded crank (i had it welded after i bought it), cyls, waveeater clips+couplers, head, carbs+intake, starter - newly rebuilt. 0.055 squish. OEM head cut 0.022, wiseco pistons @0.005, OEM seals, gaskets, wrist pins, put together with yamabond and a torque wrench, not guesstimations. has >1 hour of runtime, rings have not worn in yet, compression is 105 across the board, once broken in should be about 135ish. I will be playing on this at the lake so comp will peak next time i run a full tank through it if it doesnt sell before first of april. $2300 shipped conus SOLD
Carbs with Prok F/A and adaptors. single 95 main jet return, adjustment screws drilled, OEM rebuild 1 hr ago. $500 obo
Cages and carbon tec reeds with 1 hr run time $120 shipped.
Ebox with Dplate chip - 225 shipped.
Power valve servo - $130 shipped
OEM Sponsons - $55 shipped
Midshaft - 80 shipped.
Motor mounts - 15 shipped or 55 for all 4 shipped.
Pump minus driveshaft and steering nozzle - POS that has cavitation vane damage and minor rock damage on the impeller - 120 shipped.
R&D Single bar intake - 60 shipped. SOLD
R&D Finned plate for CC, not speed - 90 shipped.
Gauge with 168 hours, works but has oxidation damage that will sand out and clear coat. It is very readable right now, just not brand spankin new. - 100 shipped.
Stock sponsons, have some rock love on the edge that will sand out but the mounting holes are perfect. - 55 shipped.
Trim cable+the twish adjuster - 50 shipped
Steering cable - 50 shipped
Seat - perfect minus a scrape on the front right corner UNDER the visible edge - 100 + shipping
Jetworks Oplate instead of Dplate. Dont know how it effects the exhaust over a D plate but carbon build up is even on it. 45 shipped.
Any other crap you guys want on it, it has.
. Located in Saint George, UT, 84770. Could deliver parts to havasu since we go there every once a while to ride.
And this little bastard chases you if he thinks you have crackers. He also wants you to buy my stuff.
Last edited by 88kawi5fiddy; 05-04-2015 at 08:41 PM.
03-25-2015, 09:00 AM #2
- Join Date
- Jul 2014
- Newport, NC
Dibs on the intake!
03-25-2015, 09:05 AM #3
03-29-2015, 05:57 AM #4
- Join Date
- Dec 2012
Damn, Beat me to the duck!
I'm still interested in the carbs though PMed.
03-29-2015, 10:15 AM #5
- Join Date
- Jun 2012
I'd take the gauge
03-30-2015, 12:04 PM #6
04-29-2015, 04:09 AM #7
bumperino! replace that rusted out core since you forgot to fog the engine!!!
05-03-2015, 05:03 PM #8
05-03-2015, 05:04 PM #9
06-08-2015, 11:46 PM #10
engine, intake grate, rideplate, gauge, flame arrestors sold.
send offers on reeds, ebox, carbs, midshaft, other random chit you might want.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By YudLuz2 in forum Yamaha ClassifiedsReplies: 5Last Post: 08-15-2012, 07:57 PM
By bfal in forum Yamaha How To & FAQsReplies: 1Last Post: 05-12-2008, 02:53 AM
By alias3r in forum Yamaha PWC Performance (2-stroke)Replies: 19Last Post: 03-31-2008, 10:49 PM
By BD in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 07-25-2007, 06:46 PM
By birel33 in forum Yamaha Open DiscussionReplies: 7Last Post: 01-11-2007, 11:24 AM