03-26-2015, 12:40 AM #1
What impeller to run with mods on a 04 RXP
What impeller should i run if a upgrade my supercharger with a ET 127 wheel, 42lb injectors and intake?
Also what other supporting mods you would think that i need.
03-26-2015, 02:05 AM #2
Riva intake grate, solas 15/20 prop, remove the resignator and ad a free flow or through hull exhaust and a 4inch air Intake.
03-26-2015, 03:44 AM #3
If you do the 4inch air intake you will need a catch can and I highly recommend an external intercooler.
03-26-2015, 04:38 AM #4
03-26-2015, 11:10 AM #5
Great little wheel if you through every mod you can at it!
03-26-2015, 01:02 PM #6
Do i also have to retune the computer et 127 and 42lb injectors or does it adjust itself?
03-26-2015, 02:50 PM #7
I have the 42's and ET127's in stock also.
03-27-2015, 12:29 AM #8
What kind of freight chargers apply to get the goods to Australia?
03-27-2015, 08:09 PM #9
Also if i replace the OEM intake with a 4" kanaflex and filter, What do i do with the plug that connects to the original airbox? Is this a air flow meter?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By mhagley in forum Yamaha PWC Performance (4-stroke)Replies: 5Last Post: 03-05-2014, 05:04 PM
By jiggen01 in forum Yamaha Old School SkisReplies: 8Last Post: 03-29-2010, 08:29 PM
By QWKRN U in forum 4-Tec PerformanceReplies: 4Last Post: 09-08-2009, 08:57 AM
By wave15stx in forum Yamaha PWC Performance (4-stroke)Replies: 10Last Post: 05-26-2009, 10:03 PM
By snowrunner in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 08-07-2006, 07:08 AM