Results 1 to 4 of 4
  1. #1
    Chrisrokc's Avatar
    Join Date
    Apr 2006
    Oklahoma City, OK

    What to use for Tunnel Reinforcement

    I have the R&D skin to reinforce the pump tunnel. I took out the brackets, removed the hex looking things and sanded down the rest. Got it to fit just fine. Now to attach it! What should I use?????

  2. #2
    Duke's Avatar
    Join Date
    Jul 2006
    I used the Lord epoxy that must be used with that special mixture gun. Very difficult and fast setting. IR uses marinetex epoxy with great results. I have heard several of the other members using this as well.

  3. #3
    Happily Self-Employed WFO's Avatar
    Join Date
    Nov 2005
    Houston, Texas
    Yes, I just did one with Marine Tex and I will probably use that from now on.

    I put 5200 under the brackets to seal and secure them to the piece.

  4. #4
    LORD FUSOR fiberglass structural adhesive slow set works great.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. advise on dremel tool for tunnel reinforce??
    By Full_Throttle in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 02-21-2008, 12:07 PM
  2. Which carbon fiber to use for tunnel?
    By Yellow93 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 08-30-2007, 03:58 PM
  3. What To Use For Oil Change?
    By Flynfox in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 02-16-2007, 04:31 PM
  4. what to use for a fuel line cap?
    By GP1500SC in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 07-19-2006, 11:04 AM
  5. What to use for hull fill-in?
    By idizzy in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 12-10-2005, 08:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts