Thread: Keepgeting crap error codes
04-04-2015, 02:47 AM #1
Keepgeting crap error codes
Any ideas would be good thanks advance
04-04-2015, 07:32 PM #2
Been doing some research all points to the tas sensor eg the throttle leaver I have checked continuity between plug and ecu plug and all test ok
Good news the sensor is same on all model late Seadoo so I can brow my mates for a test
But I think maybe the loom at the bend that is open circuits after hitting a wake
Last edited by xdrian; 04-04-2015 at 10:24 PM.
04-05-2015, 01:39 AM #3
04-05-2015, 02:31 AM #4
04-11-2015, 12:33 AM #5
all errors were pointing to TAS sensor or throttle body errors, I tested all the wires all OK
must have been a crack in one or more wires that open circuit after hitting a wake and handle bars turned a bit just enough to error.
cut out the six and spliced in new wires now have run for 4 hrs no problem won't go one hr before failing.
also left lose down the centre so not to twist so much as before
04-11-2015, 10:04 AM #6
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Shibby1485 in forum Sea Doo Open DiscussionReplies: 8Last Post: 07-12-2012, 01:18 PM
By BOOSTED in forum 4-Tec PerformanceReplies: 13Last Post: 05-23-2010, 01:33 AM
By MrSxy4Ever in forum Kawasaki PWC Performance (4-stroke)Replies: 4Last Post: 06-05-2007, 06:49 AM
By stonylake rxp in forum 4-Tec PerformanceReplies: 1Last Post: 05-18-2007, 10:27 PM
By ralphmalph3 in forum 4-Tec PerformanceReplies: 2Last Post: 03-10-2007, 11:17 AM