04-07-2015, 11:49 PM #1
Supercharger mod. Riva Gen2 vs ET 127mm
Just trying to get peoples opinions on which wheel to run on my 215 RXP.
A guy local to me will supply a Riva Gen 2 wheel but i want peoples opinions on which is better. Riva gen 2 127mm vs ET 127mm
Why is it that the Riva 127mm does not require a 3mm spacer and the ET wheel does?
Which is better?
I need Help......
04-08-2015, 02:18 AM #2
ET. There's a few boys down there that are running the 127. They've asked me many questions on setup and I'm sure you can ask them. I run a 140 now and at times wish I kept things simple with that wheel when I ran it but I'm too far gone now lol
jerry sells both in his store for whatever way you choose to go. I just share knowledge and results I had .. At the time I had a Riva s3 charger and was told to try this new wheel 4 years ago. So I did and wow .. Like I said just my experience here but the 127 hammered the s3 in mid range pull.
The 3 mm spacer is what some of the mid range differences. The older Riva wheels had a taller blade and a outer charger housing to compensate for that larger blade therefore a spacer was not needed but correct me if I'm wrong
04-08-2015, 05:50 AM #3
04-08-2015, 06:01 AM #4
Ok Thanks guys.
What about ET 127 vs Stock X charger? Just cause the cost is ET 127 + rebuild is close to what an X charger is.
04-08-2015, 06:05 AM #5
The 127 will hit harder on the bottom and mid range and is the same on top end.....This is the word out on the water.....
04-08-2015, 06:47 AM #6
Et127 is a great charger, I'd take It over the x charger and it has a nice note to it.
04-08-2015, 06:49 AM #7
Go Et still , much lighter = less maintance and has a unique sound to it ...
If u want the best dropin 215 wheel go the les cooke A wheel , lightest by far and bullet proof ..
you don't need to rebuild unless due , simple remove front cover and follow factory instructions ...
04-08-2015, 11:27 AM #8
04-08-2015, 11:59 AM #9
looks like that 127 will save you some good amount of coin also.
Last edited by JPsGP1200R; 04-08-2015 at 02:00 PM.
04-09-2015, 01:13 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Highboosted in forum Sea Doo ClassifiedsReplies: 11Last Post: 09-02-2013, 05:54 PM
By stickshift69 in forum Sea Doo ClassifiedsReplies: 1Last Post: 07-28-2010, 08:53 AM
By hsdforever in forum 4-Tec PerformanceReplies: 2Last Post: 07-09-2008, 08:01 PM
By TRuBLuE01 in forum Yamaha PWC Performance (4-stroke)Replies: 10Last Post: 03-30-2008, 05:26 PM
By 01xdime in forum 4-Tec PerformanceReplies: 8Last Post: 10-07-2005, 03:44 PM