Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: R8 on SVHO

  1. #1

    R8 on SVHO

    Has anyone done it? What sort of results are you guys seeing?


  2. #2
    There is none for the svho since it's the same as r3. The SHO r8 just calls for bigger injectors for higher boost.

  3. #3
    LugNutLS1's Avatar
    Join Date
    Jun 2014
    Location
    St. Louis Mo
    Posts
    594
    +1
    53
    R8 is sho tune. Svho has an r1, r2, r3, and offshore tune

  4. #4
    What sort of results are you guys seeing at 9500?

    Stock wheel and bolt ons.

  5. #5
    95.4mph FZR FZeeR's Avatar
    Join Date
    Aug 2014
    Location
    FL
    Posts
    1,810
    +1
    469
    9500? You mean 8500?

  6. #6
    Quote Originally Posted by d00m View Post
    What sort of results are you guys seeing at 9500?

    Stock wheel and bolt ons.
    Don't see many revving 9500 unless closed course racing.. You'll need valvetrain above 8600

  7. #7
    With valvesprings an retainers of course is anyone reving 9500?

  8. #8
    Haven't seen many.. If the limit is 9500, you don't want to be at 9500.

  9. #9

    Join Date
    Mar 2014
    Location
    Siesta Key, Fl
    Posts
    1,066
    +1
    155
    Being on the limiter is BAD when turning high RPM's..
    9500 with out a built engine sound like waiting for BOOM.

    9200 is probably where I stop.

  10. #10
    95.4mph FZR FZeeR's Avatar
    Join Date
    Aug 2014
    Location
    FL
    Posts
    1,810
    +1
    469
    My soft limiter is 8850 and hard limit is 9260...I've hit 85mph in 85deg heat and not on the limiter so you shouldn't need to rev to 9500...I think mine will pull 86-87mph in cool air and be right near the limiter which is perfect...

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. questions about scom on svho. Feels slow?
    By d00m in forum Yamaha PWC Performance (4-stroke)
    Replies: 20
    Last Post: 04-21-2015, 11:36 AM
  2. 2009 SHO Thermostat on SVHO engine??
    By Jmfmk3 in forum Yamaha PWC Performance (4-stroke)
    Replies: 12
    Last Post: 03-19-2015, 12:46 PM
  3. Adding O2 sensor on SVHO
    By LugNutLS1 in forum Yamaha PWC Performance (4-stroke)
    Replies: 14
    Last Post: 09-18-2014, 07:03 AM
  4. Question on SVHO Re-Flash required mods
    By LugNutLS1 in forum Yamaha PWC Performance (4-stroke)
    Replies: 11
    Last Post: 07-07-2014, 02:20 PM
  5. MoTeC M1 on SVHO
    By AD4342 in forum Yamaha ECU Support
    Replies: 7
    Last Post: 05-14-2014, 08:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •