Results 1 to 10 of 10
  1. #1
    Ale's Avatar
    Join Date
    Feb 2014
    Location
    ITALY
    Posts
    825
    +1
    57

    WTB - set of injector ..... maybe 555

    2009 fzr sho

    with new intercooler maybe I will need bigger injector.
    I run R3 Et15.5 type 14 IC
    think will need 555 injector like STI pink or maybe gpr injector.
    will need also adapter and spacer if needed...
    tell me what you have for me
    thanks
    Ale


  2. #2
    hdlefler's Avatar
    Join Date
    Aug 2010
    Location
    Wesley Chapel, Fl
    Posts
    911
    +1
    100

  3. #3
    I have a set of GPR injectors but they need to be cleaned before I would use them. Just had a set cleaned for my Xlt and they flowed 570. If you want them 125 shipped to you.

  4. +1 by:

    WFO

  5. #4
    HydroStream6's Avatar
    Join Date
    Jun 2012
    Location
    New York
    Posts
    649
    +1
    88
    Quote Originally Posted by hdlefler View Post
    Did you have to send your R3 in to get adjusted for these injectors?

    Thanks

  6. #5
    hdlefler's Avatar
    Join Date
    Aug 2010
    Location
    Wesley Chapel, Fl
    Posts
    911
    +1
    100
    Quote Originally Posted by HydroStream6 View Post
    Quote Originally Posted by hdlefler View Post
    Did you have to send your R3 in to get adjusted for these injectors?

    Thanks

    No, no adjustment needed with the reflash. With the pinks I had a great idle.

  7. #6
    Ale's Avatar
    Join Date
    Feb 2014
    Location
    ITALY
    Posts
    825
    +1
    57
    Quote Originally Posted by scittb View Post
    I have a set of GPR injectors but they need to be cleaned before I would use them. Just had a set cleaned for my Xlt and they flowed 570. If you want them 125 shipped to you.
    not a bad deal.
    can you clean and flow-test them for me? I will pay for service.
    do I need spacer or plug adapter for this inj ?

  8. #7
    Identical connectors. Needs same spacer as the pinks. I believe its 1/2 inch. I shld have the longer bolts to give you as well Its 22.00 dollars US per injector to clean plus shipping. If you want 210 shipped cleaned then.
    He will give you a before and after flow sheet new filters and O-rings as well. Probably take a week to turn the injectors before shipping though.

  9. #8
    HydroStream6's Avatar
    Join Date
    Jun 2012
    Location
    New York
    Posts
    649
    +1
    88
    Quote Originally Posted by hdlefler View Post
    Quote Originally Posted by HydroStream6 View Post
    Quote Originally Posted by hdlefler View Post
    Did you have to send your R3 in to get adjusted for these injectors?

    Thanks

    No, no adjustment needed with the reflash. With the pinks I had a great idle.
    Very good to know, thanks. I'm getting my wideband installed this weekend. We ride in some cold air/water up here and I'm a bit nervous even with my C3 wheel. So basically you can just install injectors and tune the RRFPR and good to go?

  10. #9
    Quote Originally Posted by HydroStream6 View Post
    Quote Originally Posted by hdlefler View Post
    Quote Originally Posted by HydroStream6 View Post
    Quote Originally Posted by hdlefler View Post
    Did you have to send your R3 in to get adjusted for these injectors?

    Thanks

    No, no adjustment needed with the reflash. With the pinks I had a great idle.
    Very good to know, thanks. I'm getting my wideband installed this weekend. We ride in some cold air/water up here and I'm a bit nervous even with my C3 wheel. So basically you can just install injectors and tune the RRFPR and good to go?
    im in NY and I was on the edge with C3 and stock injectors w the fizzle intercooler. I had my RRFPR on static at 58 psi to get a good afr.

  11. #10
    Ale's Avatar
    Join Date
    Feb 2014
    Location
    ITALY
    Posts
    825
    +1
    57
    Quote Originally Posted by scittb View Post
    Identical connectors. Needs same spacer as the pinks. I believe its 1/2 inch. I shld have the longer bolts to give you as well Its 22.00 dollars US per injector to clean plus shipping. If you want 210 shipped cleaned then.
    He will give you a before and after flow sheet new filters and O-rings as well. Probably take a week to turn the injectors before shipping though.
    could be a good deal.
    let me know if I can found something here, in Italy, I will let you know
    thanks
    Ale

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB - Parts WTB Set of Proks FA's for a 951 Carbed
    By Alpheus in forum Sea Doo Classifieds
    Replies: 6
    Last Post: 01-05-2012, 10:26 PM
  2. Replies: 4
    Last Post: 08-28-2011, 02:34 PM
  3. wtb: set of good used exhaust valves
    By Louis914 in forum Sea Doo Classifieds
    Replies: 1
    Last Post: 06-11-2009, 05:37 PM
  4. WTB: set of high compression domes for 1050
    By pslt780 in forum Polaris Classifieds
    Replies: 2
    Last Post: 06-03-2009, 07:09 AM
  5. WTB: Set of mirrors for Seadoo GTS (white)
    By rjcapo02 in forum Sea Doo Classifieds
    Replies: 0
    Last Post: 05-29-2008, 03:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •