04-28-2015, 12:07 PM #1
block, cylinder head, rocker arm ?s
Ok I've read the sticky and everything else I could find and guess I've confused my self from all the reading. Anyways I have an 04 block an 06 head and 04 rockers and shaft. Will I be ok just removing the restrictor in the block or will I need the newer shaft as well. Thanks and sorry for asking something I'm sure has been covered just don't wanna screw this up.
04-28-2015, 01:33 PM #2
- Join Date
- May 2012
If I remember correctly, you need the 06 shaft if you want to remove the restrictor from the block. If you are running the 04 rockers and shaft you need to leave the restrictor in place.
04-28-2015, 06:36 PM #3
04-28-2015, 08:33 PM #4
Ok so 06 head with 04 rockers and shaft leave restrictor in the block
04-29-2015, 03:51 AM #5
04-29-2015, 08:38 PM #6
No, with an 06 head you need to use the 06 shaft. The oil passages are different for the rockers.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By tron in forum Sea Doo ClassifiedsReplies: 5Last Post: 04-22-2015, 11:01 PM
By michail in forum Sea Doo ClassifiedsReplies: 17Last Post: 07-27-2014, 08:06 AM
By jbombino in forum Sea Doo ClassifiedsReplies: 5Last Post: 04-18-2010, 11:01 PM
By jbombino in forum 4-Tec PerformanceReplies: 6Last Post: 03-25-2010, 07:43 AM
By sr71bb in forum 4-Tec PerformanceReplies: 4Last Post: 09-19-2006, 03:39 PM