Thread: Supercharger advice
04-29-2015, 07:36 PM #1
- Join Date
- Mar 2015
I see on my older ski the supercharger case does not have a oil hole up by the gear like my newer ski has my question is should I drill hole in the older case in the same spot to help and lube the bearings or just leave it like it is would be very easy to do while I have it all apart any advice would help alot. It is on a 2004 gtx sc. Thanks
04-29-2015, 07:39 PM #2
That hole Is for the 08 and up Scer oiler system....I would leave your cases as is...
04-29-2015, 07:43 PM #3
IF u have your supercharger DISASSEMBLED for a rebuild or something the TRICK before there were any oilers was to have it clocked as it would set in the motor then drill a weep hole with a catch cup in the housing on top between the bearing portion of the housing angled forward and then the oil splashes into the weep hole to help lube bearings more...........if u go back thru my thread I have its all there with pics..........GOOD LUCK!!!!!!!!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Cheek in forum 4-Tec PerformanceReplies: 16Last Post: 04-14-2014, 09:35 AM
By Mi410 in forum Sea Doo Open DiscussionReplies: 4Last Post: 05-11-2012, 05:00 PM
By Tripower in forum 4-Tec PerformanceReplies: 6Last Post: 10-30-2011, 11:17 AM
By ktyamaha36 in forum Sea Doo Open DiscussionReplies: 6Last Post: 04-28-2010, 05:32 PM
By superblownrxp in forum 4-Tec PerformanceReplies: 12Last Post: 07-27-2008, 09:47 PM