Thread: Shot in the dark! Gtx timing.
05-02-2015, 02:49 PM #1
Shot in the dark! Gtx timing.
Hi guys, I just want to check where the stock position is set on the cam timing sprocket. I scribed my chain and sprocket so I could put the chain on exactly the way it was but what I didn't take note of was where the sprocket bolts sit in the bolt holes as there is room for adjustment. I locked the crank and camshaft with the tools and lined up the 1503 marks with the head. And the bolts sat in the centre of the holes in the sprocket. If any one could be kind enough to take a photo of the side of there sprocket so I can see where th bolts align in the holes I would be very grateful.
Im just in the process of elimination with my funny idle and hard starting and this will tick one of them off the list!
05-02-2015, 03:06 PM #2
Here is a timing shot on disassembly, stock 07GTX. Don't worry about the guy with the power drill.
05-02-2015, 04:56 PM #3
05-03-2015, 03:30 AM #4
- Join Date
- May 2013
05-03-2015, 10:44 AM #5
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By peteshauling in forum Yamaha ClassifiedsReplies: 0Last Post: 08-21-2011, 07:51 AM
By akent in forum Yamaha PWC Performance (2-stroke)Replies: 17Last Post: 11-22-2006, 09:45 AM
By Yuji in forum Sea Doo Sport BoatsReplies: 3Last Post: 11-21-2006, 05:13 PM
By Polaris_Nut#1 in forum Polaris Open DiscussionReplies: 9Last Post: 11-09-2006, 01:34 PM
By JAG in forum Sea Doo Open DiscussionReplies: 11Last Post: 11-04-2006, 03:41 PM