05-02-2015, 11:25 PM #1
2014 RXPX current mods mph estimate? Advice?
Hey guys was wondering your thoughts on an estimate mph that I would hit with my current setup build process.
Also what other mods should I do next or which are a must for this setup? Thanks guys! (ocean riding only maybe/lake once in a while)
4" INTAKE FIZZLE
RIVA CATCH CAN
FIZZLE F1000 INTERCOOLER W/HARD PIPES
FULL RIVA EXHAUST
R&D R3 ECU 8650 RPM
SUPERTECH VALVE SPRINGS/RETAINERS
STOCK X CHARGER
Last edited by 07BRPRXP; 05-03-2015 at 12:12 AM.
05-03-2015, 12:29 AM #2
I have very similar mods + cam and pulled 80.5mph in the Texas heat and humidity but dangerously lean up top with stock injectors and I'm still working on that. Tap manifold for air/fuel for sure.
05-03-2015, 12:30 AM #3
I would say 76ish maybe a tad faster, stock prop at 8650 won't take you very far. Stock grate is going to slow the ski down. Stock injectors will limit you as well. Yoy have a list that could take you to 80ish if you changed a couple things
05-03-2015, 03:04 AM #4
Hey Nate, yea I dont think i'll be installing a cam just yet lol but trying to get a list down of following mods that are needed to run safely. btw your ski is beautiful!
05-03-2015, 03:05 AM #5
If I can hit 80 that would be amazing, I was thinking r&d grate with 14/19 prop/r&d seal and ss wear ring?
05-03-2015, 04:11 AM #6
05-03-2015, 06:19 AM #7
Bigger injectors, R&d grate, tap into your exhaust for 02 sensor and monitor afrs, fuel reg.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Hydrotherapy in forum Yamaha PWC Performance (4-stroke)Replies: 6Last Post: 10-07-2013, 10:54 PM
By Ken62465 in forum 4-Tec PerformanceReplies: 5Last Post: 06-20-2013, 08:32 AM
By lew04 in forum Yamaha PWC Performance (4-stroke)Replies: 10Last Post: 06-20-2011, 08:23 PM
By b_dolla44 in forum 4-Tec PerformanceReplies: 12Last Post: 10-10-2010, 08:12 PM
By jankyxl800 in forum Yamaha PWC Performance (2-stroke)Replies: 16Last Post: 05-04-2010, 08:49 PM