Thread: UMI steering question
05-06-2015, 08:43 PM #1
UMI steering question
Hey Guys,I have a good friend of mine that i am gonna help install a UMI steering system on his ski....Heres the low down:
Full UMI steerring system:
Is the OEM throttle cable gonna work with this system???
OR do i need to have him get a different cable???
Do we need any special adapters to connect it to the throttle lever or does it connect to the UMI lever no problem...
I do not have this in my possession,so i cannot look or visualize what it needs....I also do not have the directions or do not even know if it has direstions with it... Thats why i figured id ask the professionals who have already installed this sytem..Thanks guys as always
05-07-2015, 06:00 AM #2
I know I needed an adapter to hook the stock cable to my Riva finger throttle. I can't see why the stock cable would not work with the umi sytem. "but that's just a guess". It worked fine for my conversion.
05-07-2015, 06:15 AM #3
Thanks brother,thats what were wondering...
05-07-2015, 06:39 AM #4
You should be able to get the adapter cheaper through blowsion.
05-07-2015, 06:59 AM #5
You need an adapter for the Cable to finger throttle, as the finger throttles are universal.
One hint. When installing the UMI stem take and lay a towel on the gas tank and then use a rounded file and file down the inner lip on an angle where the stem of the UMI hits the hull. don't need a sazsaw or anything, just use a rounded file and take a little off at the angle of the UMI.
05-07-2015, 07:10 AM #6
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By nini engineering in forum 4-Tec PerformanceReplies: 3Last Post: 01-31-2010, 05:08 PM
By mstennes in forum 4-Tec PerformanceReplies: 5Last Post: 10-17-2008, 12:53 PM
By 04RXP22 in forum 4-Tec PerformanceReplies: 6Last Post: 10-15-2008, 07:39 AM
By mstennes in forum 4-Tec PerformanceReplies: 6Last Post: 09-02-2008, 12:06 AM
By BoostRetard in forum Polaris PWC PerformanceReplies: 10Last Post: 01-12-2008, 10:46 AM