Results 1 to 6 of 6

Thread: Advice on setup

  1. #1
    Rock918's Avatar
    Join Date
    Aug 2011
    Location
    Lake Murray, SC
    Posts
    169
    +1
    6

    Advice on setup

    I have the mods listed in my signature. I know the best thing to do would be a reflash, upgraded intercooler and a better wheel, but the budget is not going to allow me to do all that right now. I am thinking about just doing the reflash for now then the intercooler and wheel next summer.

    My question is, with a reflash and my increased RPM's will I need to repitch my prop? Also, should I go with the R2 or R3?

    Thanks for any advice you can give.


  2. #2
    Baja FZS's Avatar
    Join Date
    Oct 2014
    Location
    KC & LOTO
    Posts
    121
    +1
    18
    I had the same decision to make and I went with the R3. I didn't want to pay to up upgrade the R2 in a year or so. What speeds are you getting now?
    Last edited by Baja FZS; 05-09-2015 at 01:33 PM.

  3. #3
    Rock918's Avatar
    Join Date
    Aug 2011
    Location
    Lake Murray, SC
    Posts
    169
    +1
    6
    Quote Originally Posted by Baja FZS View Post
    I had the same decision to make and I went with the R3. I didn't want to pay up upgrade a R2 in a year or so. What speeds are you getting now?
    Thats kind of what I was thinking.

    Best so far on the GPS is 71. How about you?

  4. #4
    Baja FZS's Avatar
    Join Date
    Oct 2014
    Location
    KC & LOTO
    Posts
    121
    +1
    18
    I'm at 73 mph but I'm still running the stock prop. I need to re-pitch it. I also weigh 280, so that's probably scrubbing off some speed. My goal is 75mph which I feel is very realistic with my mods.

  5. #5
    Rock918's Avatar
    Join Date
    Aug 2011
    Location
    Lake Murray, SC
    Posts
    169
    +1
    6
    I've decided to go with the R3 and the Riva engine cooling upgrade for the stock intercooler. I'm thinking this will get me to 75ish. Someone please correct me if I'm wrong or if there is something better then the riva cooling upgrade for my setup for around the same money.

  6. #6
    Good decision to go with the R3. No sense paying for the R2 and then upgrading a year later. Also, if you decide to change out the sc wheel, you already have the R3. I am upgrading to a 160mm pump so if you are interested in any of the following, let me know: 14/23 Skat, 15/22 Skat, 13/22R Solas.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. i need some advice on a intercooler setup for my svho thanks!
    By BumblebeeFZS in forum Yamaha PWC Performance (4-stroke)
    Replies: 7
    Last Post: 10-28-2015, 03:25 PM
  2. Advice on trailer setup
    By Rocketman9132 in forum Sea Doo Open Discussion
    Replies: 21
    Last Post: 06-10-2014, 10:17 PM
  3. Advice on base fuel pressure for my setup.....
    By Jwall in forum 4-Tec Performance
    Replies: 4
    Last Post: 05-13-2013, 02:28 PM
  4. Advice on setup for FZS
    By gleson in forum Yamaha PWC Performance (4-stroke)
    Replies: 9
    Last Post: 07-10-2011, 10:11 PM
  5. Advice on Rossier Pipe setup
    By revhardSPX in forum 2-Stroke Performance
    Replies: 3
    Last Post: 09-23-2010, 06:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •