Results 1 to 7 of 7
  1. #1

    Cooling system ?

    I have a late 92sl 650 the cooling system looks like a combination between a 92 and 93. I am not the orginal owner, so I am trying to figure out someone elses work . The outlet line is like the 93 model and so is the inlet. But there is the small aluminum cylinder on the exhaust side of the motor like the 92 with the two lines going into it and the three coming out are pluged and so are the the holes on the manifold where they would hook up to. My question is was this done from Polaris on the late 92 or a home job and will it be ok like this or do I need to change it. ( thanks for the help on the fuel pump at least this thing starts now).


  2. #2

  3. #3
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26
    This might help ya out. Good Luck.

    http://www.greenhulk.net/forums/showthread.php?t=10871

    TSB's

  4. #4
    Quote Originally Posted by Polaris_Nut#1 View Post
    This might help ya out. Good Luck.

    http://www.greenhulk.net/forums/showthread.php?t=10871

    TSB's
    Thanks for the diagrams it looks like maybe a dealer update.My set up looks pretty much like the diagram in pic 4.59 minus the flush line and I still have the two lines coming off the crankcase going to the little aluminium cylinder with the three lines on it pluged and the three spots on the manifold where they go pluged. Does this set up sound ok to use? It looks to have been this way for awhile.But I have never had the ski in a useable condition yet. I am still a little confuised I am hoping maybe some one out there has seen or remebers somthing about this set up. Thanks for the input so far.

  5. #5
    Thanks for the input.. My set up looks close to the one in figure 4.59 that PolarisNut sent. Matt

  6. #6
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Matt, How about drawing out a diagram or taking a picture to make sure we are all on the same page.

  7. #7
    Quote Originally Posted by ph2ocraft View Post
    Matt, How about drawing out a diagram or taking a picture to make sure we are all on the same page.




Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. closed vs open loop cooling system
    By Tiplickhahaha in forum 4-Tec Performance
    Replies: 31
    Last Post: 03-08-2015, 10:53 AM
  2. How do I know if the cooling system is working
    By utahnewbie in forum Polaris Open Discussion
    Replies: 1
    Last Post: 05-31-2007, 09:42 AM
  3. Cooling system vent hose?
    By RVRM in forum 4-Tec Performance
    Replies: 4
    Last Post: 01-03-2007, 07:09 PM
  4. 05 GTX 4tec SC Cooling System Issue
    By jetworx hawaii in forum Sea Doo Open Discussion
    Replies: 3
    Last Post: 05-28-2006, 01:18 PM
  5. Hulk, Flushing Closed-Loop cooling system
    By Red Devil in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-12-2005, 09:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •