04-20-2007, 10:52 AM #1
special instructions for Pirranha parts IC?
i thought there was something diff to install this i read?
seems simple enough with just removing 2 bolts on the pump location
04-20-2007, 11:22 AM #2
That should be it...If you have Q's just ask
04-20-2007, 11:29 AM #3
Mine was missing the 2 brass fittings in the box
anyone know the ones i need to buy?
04-20-2007, 11:43 AM #4
This hose is what gets removed in the rear and becomes the IC out hose right? then put a new hose from the rear to the IC in correct?
what size hose is this?
I have 3/4" ID 1" OD heater hose lying around... that work?
04-20-2007, 11:48 AM #5
- Join Date
- Dec 2006
- Crest Hill, IL
04-20-2007, 12:03 PM #6
hose from the pump (hose with green stripe) goes to IC in
hose from IC out goes to bottom of exhaust manifold
04-20-2007, 12:16 PM #7
ok seems easy enough...
now just need to figure out where to mount the groco strainer...
04-20-2007, 12:19 PM #8
in the hose between the pump and the intercooler
04-20-2007, 12:22 PM #9
yea i know that i mean mounting in the bay somewhere... lol..
04-20-2007, 12:26 PM #10
I don't mount mine. I just stick it on the hose.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By YudLuz2 in forum Yamaha PWC Performance (2-stroke)Replies: 23Last Post: 06-17-2007, 01:20 AM
By spud in forum Yamaha PWC Performance (2-stroke)Replies: 13Last Post: 04-23-2006, 11:51 PM
By ArmyRXP in forum 4-Tec PerformanceReplies: 6Last Post: 03-28-2006, 12:19 PM
By tchies in forum 4-Tec PerformanceReplies: 2Last Post: 10-28-2005, 04:47 PM