Thread: Need A Little GPR Help!
04-30-2007, 08:55 PM #1
Need A Little GPR Help!
Well first off I have two things I need help with.
Ski: '02 GP1200R
1. I have a set of R&D 1300 sponsons that I want to put on my 1200. Ik now there was a how to back in the day whe nthey came out but I can't find them anywhere..here or the Riva forums.
I think all I have to do is take out the 3 or 4 little bolts on each side of the hull and fill the holes with some 5200 and then drill the mounting bungs flush with the hull and then re-tap the holes? Right?...I'm not sure
So the questions is what do I have to do to make them fit?
2. I have a set of heads that uses o-rings and when I go to install the heads do I just use grease on the o-rings or should I use something else to seal them up better?
Any help is great cause I have no clue!
04-30-2007, 09:06 PM #2
RX951 will help you out any second! There is a thread on here telling you how to do it step by step. I did it but can't find it now.
05-01-2007, 08:31 AM #3
Thanks Duke! Billy you got any suggestions or anyone else for that matter!??
05-01-2007, 09:25 AM #4
I use a light coat of grease to seal almost all of my gaskets on the engine. I do not use it on any of the intake components.
05-01-2007, 07:06 PM #5
Anyone else ahve any ideas about the sponsons?!
05-01-2007, 08:59 PM #6
on the early model skis the boss for the sponsons protrude from the hull all you need to do is make this flush to run the R&D sponsons. grind it and run a tap through to clean up the threads you should be good.
05-01-2007, 09:37 PM #7
05-02-2007, 06:22 AM #8
sorry Jon, I missed this thread, been busy....
Bill, Duke, thanks for helping him out !
05-02-2007, 07:31 AM #9
05-02-2007, 07:34 AM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By johnny7 in forum Polaris PWC PerformanceReplies: 3Last Post: 05-29-2012, 01:48 PM
By mikeymike in forum Yamaha PWC Performance (2-stroke)Replies: 4Last Post: 04-17-2010, 07:52 AM
By Sutphen115 in forum 2-Stroke PerformanceReplies: 5Last Post: 01-04-2009, 05:18 PM
By lafjax in forum 4-Tec PerformanceReplies: 18Last Post: 09-08-2006, 07:00 PM
By beachboy66 in forum 4-Tec PerformanceReplies: 2Last Post: 07-20-2006, 07:38 AM