05-04-2007, 12:08 AM #1
need to barrow a impeller concord 14.5/24
I am running a 14/20 concord that I repitched to a 15/26 on my 2002. I am currently running 75.6 at 7270 to 7280 rpms. I am under the thought that because repitching only changes the edges of the blade, not the root.
I am somewhat confused because I was running 76.2 at 7400 rpms at 14/23 pitch. I bent it to 15/26 and lost speed, but rpms are closer. That's why I think I am pitched out on this impeller. heck I am confused I just want to try a impeller that is pitched at a solid 14.5/24 or something close to that if any one has one they can loan out?
Email firstname.lastname@example.org. I will pay shipping. if any one has an opinion on this let me know.
05-04-2007, 01:30 AM #2
05-04-2007, 09:05 AM #3
I did, Using an impeller gauge. Just you can't bend the whole blade. So the root of the blade does not change. and up here there is not a impeller shop with in 200 miles? If I can get one on loan, and the pitch it correct I can send mine out to match it! I just want to make sure I know what I want before I send it to CARL , or impros.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By diesel04 in forum 4-Tec PerformanceReplies: 0Last Post: 07-03-2010, 08:48 AM
By elviswongg in forum Kawasaki PWC Performance (4-stroke)Replies: 15Last Post: 04-30-2009, 06:17 AM
By KawieGuy in forum Yamaha ClassifiedsReplies: 0Last Post: 10-27-2008, 12:09 PM
By Saywoodj in forum 4-Tec PerformanceReplies: 4Last Post: 06-23-2008, 12:48 AM
By Pinoy in forum 4-Tec PerformanceReplies: 23Last Post: 03-08-2008, 08:33 PM