Results 1 to 2 of 2
  1. #1

    Riva Wedge steering extender ?

    I installed the Riva wedge on my RXT and found that adding the extension nut/bolt for the steering causes the steering nozzle to be off center and pointing to the left (port) side of the boat. Is this right??? This is screwed all the way in. There is no way to move it more to the right of the boat to have it pointed straight. Did you all have this issue?

  2. #2
    Moderator Snoman's Avatar
    Join Date
    Apr 2006
    South Chicagoland
    You are gonna have to adjust the steering..If i were you i would put the Hyme joint back on the end of the steering cable and adjust it like this thread..I just put the wedge on my rxp and adjusted the steering like this..
    Good luck


Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Riva Wedge = Extended Drive Shaft?
    By alex_baker202 in forum 4-Tec Performance
    Replies: 3
    Last Post: 07-14-2010, 05:28 PM
  2. Riva Wedge, is it good for rough water or for calm ??
    By rxp_boy in forum 4-Tec Performance
    Replies: 18
    Last Post: 11-21-2008, 03:38 PM
  3. Riva Wedge Results Good and Bad
    By excess in forum 4-Tec Performance
    Replies: 16
    Last Post: 06-19-2006, 09:22 PM
  4. rotax power pipe and riva wedge
    By ausrxp in forum 4-Tec Performance
    Replies: 10
    Last Post: 02-28-2006, 08:11 PM
  5. Riva Wedge
    By meeper in forum 4-Tec Performance
    Replies: 8
    Last Post: 09-20-2005, 08:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts