Thread: idle speed
05-06-2007, 07:09 PM #1
I was messing with my idle speed today on the trailor. Was gonna go ride today, an its too cold. But have it idleing at around 1600 on the trailor? Is that too high? The rpms tend to drop like crap in the water.
05-06-2007, 07:21 PM #2
05-06-2007, 07:39 PM #3
Al, you would cringe if i told you what the rpm was in the water the very first day i took it out last season.....950!!!!!ekkkkkk hmm an i wondered my it was vibrating an hard to start. oo btw can i put a primer on an still leave the butterflies in?? I was gonna hook the primer tubes up to were the injectors one were. FYI: 95 slt 750, cuz i know you gonna ask Al!!!
05-06-2007, 10:10 PM #4
IF your carbs have the oil injector that sprays directly into the venturi.
You'll have to see if you can push the fuel through the old oil injectors, I know there is a valve inside to prevent oil rolling back down the lines.
Technically you can leave the butterflies in place, you just don't pick up the minuscule air flow improvement to the engine.
I'm also pretty sure you'll have to prime that bad boy a few more times than normal as the injector nozzles are much much smaller (for the oil injection) so they will inject much less fuel than the nozzles that come in the primer kits.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By halfassjack in forum Kawasaki PWC Performance (4-stroke)Replies: 2Last Post: 08-07-2007, 12:01 AM
By Tay71980 in forum Polaris PWC PerformanceReplies: 2Last Post: 06-08-2007, 01:35 PM
By JKR1300 in forum Yamaha PWC Performance (2-stroke)Replies: 12Last Post: 05-23-2007, 11:10 PM
By Edify in forum Kawasaki PWC Performance (4-stroke)Replies: 15Last Post: 05-15-2007, 08:21 PM
By wakeborder556 in forum 4-Tec PerformanceReplies: 11Last Post: 04-16-2006, 11:47 AM