Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: rpms???

  1. #1
    allairch's Avatar
    Join Date
    Apr 2007
    Location
    calif
    Posts
    131

    Angry rpms???

    what are you guys seeing for top rpms im only seeing 7650 is that correct or are you seeing more thanks


  2. #2
    Formerly Ultra250 TN Aquaholic6801's Avatar
    Join Date
    Feb 2007
    Location
    Old Hickory,Tn
    Posts
    5,446
    +1
    650
    As of now I am seeing 7800 rpm, was seeing more when the water and air was colder.I have @ 17 hours on mine.

  3. #3
    TurboJimmy's Avatar
    Join Date
    Aug 2006
    Location
    Goodlettsville, TN
    Posts
    216
    Mine is turning 7680 with 6 hours.

  4. #4

    Join Date
    Aug 2005
    Location
    Salinas CA
    Posts
    451

    Thumbs up

    I have hit a max of 7890 per the on-board flight recorder.
    My ski now has 4 hours and is stock at this time.

  5. #5

    Join Date
    Apr 2007
    Location
    MS
    Posts
    50
    63 mph at 7580. 1/2 tank of fuel. The temp is always 85 plus when I go out and usually in the 90's. I now have 9 hours on my ski, and have 4 bars of fuel left will try Wed/Thurs night with 1 or 2 bars and post some results. Jeff

  6. #6
    7860 normal with a peak a couple of times of 7910. I'm not sure how accurate the tachs are in these things, has anyone verified with a real tach? Is it just me or does the mode that locks in peak speed/rpm reset itself when you do a sustained high speed run? I've seen it register 7910/70mph(LOL) and without me resetting it, the next high speed run it was showing 7860/70mph(double LOL). Just curious if it's a "smart" system.

  7. #7
    Silence! I Keel You! earthshaker's Avatar
    Join Date
    May 2007
    Location
    Northern CA Coast
    Posts
    1,616
    +1
    2
    On that second run you were probably going downhill

  8. #8
    rhorne1053's Avatar
    Join Date
    Oct 2006
    Location
    Santee, S.C.
    Posts
    634
    I think the highest I have ever seen mine was 7770, but I just started watching it the last couple of time out. It may have been higher back in Feb or March, I just don't remember seeing it.

  9. #9
    im getting the same

  10. #10

    Join Date
    Sep 2006
    Location
    S. Florida
    Posts
    508
    Isn't the max rpms 8100? So it seems that many of us can get another 200-300 or so rpms out of this without it running off the rev limiter. I have no idea what 200 rpms equate to as far as speed is concerned but it sounds good.



    Curtis

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 05 RXP noise @4750-4900 RPM's
    By RXPNJ in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-12-2010, 12:54 AM
  2. RXP RPM Limiting Question
    By Jarrett in forum 4-Tec Performance
    Replies: 40
    Last Post: 07-20-2007, 06:58 PM
  3. Can high heat and humidity take away 200 rpms?
    By Vern in forum 4-Tec Performance
    Replies: 14
    Last Post: 06-08-2005, 12:46 PM
  4. What should stock RPM be running?
    By Compwhiz82 in forum 4-Tec Performance
    Replies: 14
    Last Post: 05-27-2005, 04:25 PM
  5. Replies: 1
    Last Post: 05-18-2005, 07:49 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •