Thread: Extension Rod Adjustment
05-14-2007, 12:11 PM #1
Extension Rod Adjustment
After my wedge, I got an extension rod, but not sure where to adjust it.
After getting my stage I done with extension rod, I took it out for a test run and noticed that with the trim all the way up (how I usually ride) the ski would start bouncing a little at high speed. Is this common for full 'up' trim with the extension rod?
05-14-2007, 12:14 PM #2
hmmm...they're supposed to be pre-set to fit the wedge.
For highest speed you shouldn't be trimmed all the way up anyhow. Try it just one "click" above neutral.
I bet the porpoising is more from the wedge itself than the rod. time for RE opas block-offs.
05-14-2007, 12:19 PM #3
Yes this is common.. i talked with RXP Steve after i put my wedge and Extention rod in and it porpiced also..2 clicks above neutral is were it still seems to work best..at least on my ski..
I woudnt adjust it.. its pre-set from riva..If your gonna adjust it i would measure it first before you mess with it so if the adjusting doesnt work you can put it back
05-14-2007, 12:55 PM #4
Great, Thanks for the help. I'm going to keep it where it is.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By GregHoss in forum Sea Doo ClassifiedsReplies: 2Last Post: 09-08-2008, 07:31 PM
By 04RXP22 in forum 4-Tec PerformanceReplies: 5Last Post: 09-01-2007, 09:50 PM
By LiquidDI in forum 4-Tec PerformanceReplies: 2Last Post: 06-23-2007, 05:36 PM
By rxpblast in forum 4-Tec PerformanceReplies: 12Last Post: 01-24-2007, 08:58 PM
By ReDevilRXP in forum 4-Tec PerformanceReplies: 23Last Post: 11-10-2006, 09:35 PM