Thread: what jetting to go with? gp1200
05-14-2007, 12:41 PM #1
what jetting to go with? gp1200
On my 2000 GP1200R, i'm trying to figure out if i need to change my factory jettings? 117.5 and 95's are in there now. Have a set of riva flame arrestors installed, removed stock choke plates, Dplate installed, sound suppressor removed. Will be getting a prop for it shortly. Question is should i change out the stock jets and if so, to what? thanks guys for all the help.
05-14-2007, 01:00 PM #2
IMO those are going to be to small. For heavy rec riding I would go with 125m,115p, 1.5n/s, 80 or 95g spring not really sure on that one. Some guys run 120m but I think thats borderline especially if you plan on towing anything or turning a lot.
05-14-2007, 01:21 PM #3
Here is more info on the jetting. If I had to do it over again I would of done the 125 mains (for peace of mind).
See page 3 here.
05-14-2007, 06:50 PM #4
Thanks guys for in info. Looks like i found the answer i needed! THANKS
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jperkinstrades in forum Polaris Open DiscussionReplies: 2Last Post: 05-13-2013, 06:11 AM
By toyterrific in forum Yamaha Open DiscussionReplies: 1Last Post: 05-18-2011, 06:45 PM
By Green Hulk in forum Sea Doo How To & FAQsReplies: 60Last Post: 01-14-2010, 10:20 PM
By Anonymous in forum 4-Tec PerformanceReplies: 28Last Post: 03-29-2006, 08:38 PM
By two2curupt in forum Sea Doo Open DiscussionReplies: 21Last Post: 10-26-2005, 08:51 PM