Results 1 to 6 of 6
  1. #1

    What do i need to do??

    What all is involved in de-winterizing a ski? Just some new plugs and charge up the battery(or make sure its still good) or is there a lot more involved?


  2. #2
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    I'll start with some suggestions and I'm sure others can add to the list

    Lubricate intermediate bearing
    Lubricate any hinges (reverse bucket etc)
    Lubricate steering, accelerator, reverse cables
    Check mounting hardware at engine
    Check hardware for ride plate and intake grate
    Re-new fuel if no fuel stabilizer was used
    Inspect fuel hoses for kinks and proper layment

  3. #3
    ok, intermediate bearing, is that the one coming on the drive shaft before it goes into the pump housing?

  4. #4
    and how do u lube steering and throttle cables?

  5. #5
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Quote Originally Posted by mudd View Post
    ok, intermediate bearing, is that the one coming on the drive shaft before it goes into the pump housing?
    It's in the hull and the driveshaft runs though it. Between the back of the hull and engine coupler. It will have one of two style zirk fittings.

  6. #6
    ph2ocraft's Avatar
    Join Date
    Apr 2006
    Location
    Campbell, Ca.
    Posts
    14,100
    +1
    105
    Quote Originally Posted by mudd View Post
    and how do u lube steering and throttle cables?
    I get the cable lubrication tool from a motorcycle accessory shop.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. whats everything i need to do to my 98 sltx (stock as a rock)
    By sam dooley in forum Polaris Tech Tips and Info
    Replies: 4
    Last Post: 12-17-2015, 12:57 AM
  2. What will I need to install a kawasaki 1100 engine into my 2003 STX900 hull???
    By Bala in forum Kawasaki PWC Performance (2-stroke)
    Replies: 12
    Last Post: 09-27-2011, 09:03 AM
  3. Just purchased, what should I need to know or do...
    By angelico in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-03-2010, 02:27 PM
  4. What else is needed to run Riva ECU?
    By Gus13letter in forum 4-Tec Performance
    Replies: 7
    Last Post: 08-21-2008, 02:56 PM
  5. What will I need to do?
    By boataddict in forum 4-Tec Performance
    Replies: 11
    Last Post: 01-02-2007, 12:11 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •