Thread: Torque Ratings on RXP/T engine?
05-15-2007, 12:07 PM #1
Torque Ratings on RXP/T engine?
Does anyone have the torque ratings on the RXP/T engine? I'm scheming up some more ideas, but need a baseline to work with.
Heck, I'll take anything, if you folks have some data...
05-15-2007, 12:35 PM #2
It was in all those charts Riva posted some time back...
05-15-2007, 12:41 PM #3
Found a couple quickly...
We recorded the following readings for a stock RXP engine
Torque: 89ft-lbs @ 2,700RPM to 137ft-lbs @ 8,000RPM
HP: 45 and 208 at the same RPM
That was the HP output at the PTO for that particular engine. HP results vary quite a bit from one engine to the next for all manufacturers.
Stage II peak HP is 229.6 @ 8,000rpm using the same test engine.
05-15-2007, 12:44 PM #4
FOund some more...
Below is a scan of the documentation printed directly from the DEPAC software for our Huff Dyno. I am in the process of entering the data into a spread sheet so it is more legible. I will post a PDF file soon.
The data is displayed as follows:
- Column 1: Stock engine; baseline run.
- Column 2: RIVA Power Filter Kit installed.
- Column 3: RIVA Power Filter Kit and RIVA / Vortech Supercharger Impeller installed.
- Column 4: RIVA Power Filter Kit, RIVA / Vortech Supercharger Impeller and RIVA Power Cooler Kit (w/incorporated Blow-off Valve) installed.
05-15-2007, 01:35 PM #5
NICE! Thats some nice info there.
Now I'm really excited about the Green Impeller! Boost boost boost
05-15-2007, 03:39 PM #6
HP and torque... not for stock machine tho
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By Green Hulk in forum 4-Tec PerformanceReplies: 17Last Post: 06-07-2012, 05:55 AM
By friebe1 in forum 4-Tec PerformanceReplies: 4Last Post: 12-27-2011, 02:25 AM
By JFizzleJR in forum Conversion PWC Performance SkisReplies: 405Last Post: 08-25-2010, 03:15 PM
By Pee2xUSee in forum 4-Tec PerformanceReplies: 31Last Post: 09-14-2008, 12:16 AM
By Angelse68cal in forum Sea Doo Open DiscussionReplies: 1Last Post: 09-20-2005, 01:35 PM