Results 1 to 6 of 6
  1. #1
    ou812's Avatar
    Join Date
    Jun 2006
    Location
    Riverside,ca
    Posts
    6,210
    +1
    198

    Barbs for externat IC

    I can't find the 3/4" x 1/2" npt barbs anywhere. There's 1/2", 5/8" & 1" but no 3/4' barbs. Anyone have a few to sell or know where to get 'em?
    I need 1 elbow & 1 straight.


  2. #2
    Banned User
    Join Date
    Dec 2006
    Location
    Crest Hill, IL
    Posts
    9,512
    +1
    215
    Quote Originally Posted by ou812 View Post
    I can't find the 3/4" x 1/2" npt barbs anywhere. There's 1/2", 5/8" & 1" but no 3/4' barbs. Anyone have a few to sell or know where to get 'em?
    I need 1 elbow & 1 straight.
    I used a set of standard 5/8th fine thread from home depot, plastic, $1 each...I ran 5/8ths hose from the strainer to the IC, and from the IC to the exhaust manifold...I heated up the one end of the 5/8ths with a heat gun to get onto the strainer barb....Then I used a 3/4 to 3/4 coarse thread brass fitting to fit the 5/8ths to 3/4 for the manifold pipe, but ground down one side to fit the 5/8ths and left a slight ridge on the end to hold the line when the clamp was on....

  3. #3
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,627
    +1
    806
    I ordered the 90° from NAPA auto parts..
    For the other threads I go to fitzilla.com

  4. #4
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85
    Look under hose fittings in the first paragraph.
    http://www.mcmaster.com/

  5. #5
    Fast & Loud meeper's Avatar
    Join Date
    Jul 2005
    Location
    West Grove, PA
    Posts
    5,019
    +1
    54
    hey ou812, i just got 3 of them last night....they are common around here, i also brought some to 01xdime when we met on the OC ride...they are 1.99 each...sears hardware near me has them.

    or mcmastercar has them in pacs of 5...
    Last edited by meeper; 05-17-2007 at 07:49 AM.

  6. #6
    ou812's Avatar
    Join Date
    Jun 2006
    Location
    Riverside,ca
    Posts
    6,210
    +1
    198
    Thanx guys!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Separate water supply for RIVA IC
    By Chezzy in forum 4-Tec Performance
    Replies: 47
    Last Post: 03-30-2010, 12:26 PM
  2. Flex Pipes for the IC
    By ou812 in forum 4-Tec Performance
    Replies: 15
    Last Post: 03-28-2009, 05:05 AM
  3. Where can I buy an inline filter for Riva IC?
    By Hecyan in forum 4-Tec Performance
    Replies: 18
    Last Post: 07-29-2006, 04:15 PM
  4. Heads-up for '05 IC installers
    By 05Limited in forum 4-Tec Performance
    Replies: 8
    Last Post: 03-14-2006, 02:12 PM
  5. Non IC Intake for External IC
    By xenonx in forum 4-Tec Performance
    Replies: 1
    Last Post: 02-27-2006, 05:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •