Thread: Sea-doo error code
05-18-2007, 10:19 PM #1
- Join Date
- Aug 2006
- Youngs Point, Ontario, Canada on the awesome TrentSevern Waterway
Sea-doo error code
Ok Guys I need some help. I just fired up friend of mines 2006 Wakeboard edition Sea-doo from winter storage, the check engine light is on and the display is showing error code po-0118?
Does anybody know what this is telling me? I am wondering if it is a reminder for some kind of routine service or if there is something wrong with the machine. It only has 29 hours on it. It started fine and idles fine, there is fresh gas in it, the oil/filter was changed last fall and the motor was fogged for the winter.
05-18-2007, 10:27 PM #2P0118-
circuit to 12 V
Possible cause:Engine overheated or damaged sensor.Service action:Check for debris or blockage in cooling system.
Check the sensor for approximately 2280 to 2736 ohms at 19 to 21°C (66 to 70°F).
Check for approximately 2280 to 2736 ohms at 19 to 21°C (66 to 70°F) between ECM connector pins 11 and 27.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jlai in forum Sea Doo Open DiscussionReplies: 2Last Post: 07-31-2012, 09:06 AM
By steve76s in forum Sea Doo Build ThreadsReplies: 0Last Post: 05-13-2012, 06:32 PM
By BayportPhantom in forum Sea Doo Open DiscussionReplies: 1Last Post: 06-14-2011, 09:56 AM
By surfsupcharlie in forum 4-Tec PerformanceReplies: 1Last Post: 04-12-2009, 11:42 AM
By jonstephens in forum 4-Tec PerformanceReplies: 7Last Post: 05-17-2005, 05:14 PM