05-15-2011, 06:33 AM #31
07-15-2011, 09:33 AM #32
This worked on both of my 96 XP's.
Used SealAll to "glue" the magnet in place... hope it holds
Both the magnets were at the bottom of the float as described in the first thread
07-15-2011, 04:18 PM #33
Also, both of my bottom screens just popped off
There are 3 little holes on the side that i just pushed in with a pen and the bottom just fell off
It went back together easier and no need to solder it to hold in place.
The biggest issue I had was moving the tank towards the front so I could pull the sender.
I had about 3/4 tank in each and would suggest doing this when the tank is almost empty.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
FS - Parts Fuel pump sending unit fluid level gaugeBy TuningForkMarine in forum Yamaha ClassifiedsReplies: 2Last Post: 08-15-2016, 11:54 PM
By mikerosi in forum Polaris Open DiscussionReplies: 3Last Post: 06-22-2008, 12:08 AM
By Viggen in forum Kawasaki Open DiscussionReplies: 0Last Post: 06-20-2008, 06:32 PM
By Tony in forum Polaris Open DiscussionReplies: 13Last Post: 07-14-2007, 07:44 PM
By RX951 in forum Yamaha How To & FAQsReplies: 4Last Post: 03-14-2006, 06:16 PM